Sharp XV-Z10E, Operation Manual

Page: 31 / 73

-29
Basic Operation
' , " , \ , |
buttons
KEYSTONE
button
UNDO
button
' , " , \ , | buttons
UNDO button
Correcting Trapezoidal
Distortion
When the image is projected either from the top or
from the bottom towards the screen at an angle,
the image becomes distorted trapezoidally.
The function for correcting trapezoidal distortion
is called Keystone Correction.
Note
•
The Keystone Correction can be adjusted up
to an angle of approximately
±
30 degrees and
the screen can also be set up to an angle of
approximately
±
30 degrees (when the resize
mode is set to “STRETCH” for the video sig-
nal input or “SIDE BAR” for the computer sig-
nal input).
•
The Keystone Correction cannot be adjusted
in the lateral direction.
•
For details about the setup, see pages 7 and
16 .
1
Press to enter the Keystone
Correction mode.
•
The on-screen display of the Keystone
Correction mode will appear.
2
Press
'
,
"
,
\
and
|
to adjust
the Keystone Correction.
•
You can also adjust the Keystone Correc-
tion using the , , and but-
tons on the projector.
Note
•
Press to return to the default set-
ting.
•
Straight lines or the edges of images
may appear jagged while adjusting the
image.
•
When correcting trapezoidal distortion,
the aspect ratio of the image will change
slightly .
3
Press .
•
The on-screen display of the Keystone
Correction mode will disappear.
"
On-screen display (Keystone Correction mode)
Compresses
lower side.
Compresses
upper side.
XV_Z10E_E_p26_35.p65 03.11.7, 4:15 PM 29