manualshive.com logo in svg

Sharp SL-5600, Operation Manual, Page: 201 / 203

Share
Download
Sharp SL-5600 Operation Manual Download Page 201

Network Settings (Network)

195

Connecting/disconnecting to the Network

Be sure that you have completed your settings following the procedure of “Network 
Settings (Network)” on page 168. 

1.

Insert the communication card into the Card slot.
The Connection Status icon (disconnected 

) appears on the task bar.

Note:

Be sure to insert the card with the unit turned on. 
When ejecting the card after tapping on the CF(SD) card icon on the 
taskbar and selecting “Eject (SD) card”.

2.

Tap the Connection Status icon (

) on the taskbar.

The pop-up screen for network connection appears.

3.

Tap the drop-down list button to select the desired connection if multiple 
connection are available.

4.

Tap “Connect” to start connection.
If the connection to the network is established, the Connection Status icon (

) 

turns to 

. 

During wireless communication, the Connection Status icon displays signal 
strength level.
Blue: Excellent, Green: Good, Yellow: Average, Red: Poor.

If the connection is not carried out, make sure that the Network settings are 
correct and refer to the online manual, “Troubleshooting Guide”. 

5.

Tap “Disconnect” to disconnect the line.
If the connection to the network is disconnected, the Connection Status icon 
(

) will return to 

.

Tap outside of the 
pop-up screen to 
close.

Drop-down list button

Summary of Contents for SL-5600












































































































































































































Reviews:

No comments