R-D219G
E-5
E-6
BEFORE OPERATING
AUTOMATIC COOKING
PROCEDURE
1
Press STOP/CLEAR twice.
PROCEDURE
1
Press START within 1 minute of closing the door.
2
Place food in the centre
of the oven floor.
To change the final cooking result from the standard
setting ( • ), press MORE or LESS within 10 seconds.
After about 10 seconds, the indicator selected will
remain in the display. The segments will change in
shape during cooking. After cooking, the oven will
“beep”.
Getting Started
Stop/Clear
2
To Cancel a Programme
During Cooking
AUTO (Reheat)
* Suppose you want to reheat 1 serve of rice.
Notes for Automatic Cooking
• BeforeBefore operating your Oven, make sure you read
and understand this operation manual completely.
Plug the oven into a power point.
Nothing will appear on the display at this time.
Open the door.
“0” (initial display) will appear on the display.
Then close the door.
CAUTION:
Your oven has an Auto Power Off mode. If you do not
operate the oven for 5 minutes or more under any of
the following 3 states, the display will be blank until you
open and close the oven door.
1. “0” is shown on the display.
2. While you set any cooking programme.
3. Pause in AUTO (Reheat) or in Microwave Time
Cooking.
To turn on the power, open the door.
Press STOP/CLEAR once to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.
NOTE:
The oven will stop temporarily by opening the door
during the cooking.
1. When using the automatic features, carefully follow
the instructions provided in each Menu Guide to
achieve the best result.
If the instructions are not followed carefully, the food
may be overcooked or undercooked.
2. Food weighing more or less than the quantity or
weight listed in each Menu Guide, cook manually.
3. The final cooking result will vary according to the
food condition (e.g. initial temperature, shape,
quality). Check the food after cooking.
4. You can adjust cooking results for AUTO (Reheat) and
Defrost as you like using MORE or LESS pad. See page
E-11.
AUTO (Reheat) automatically reheats all the food
shown in the AUTO (Reheat) Menu Guide on page E-17.
SPECIAL NOTE for AUTO (Reheat):
1. Place food in the centre of the oven floor.
2. Never use AUTO (Reheat) to heat any beverages to
prevent the eruptive boiling. REHEAT is suitable for
heating the beverages. See page E-9.
NOTES:
1. Do not use the donabe.
2. Do not reheat any frozen food. Frozen food should be
reheated manually. See page E-10.
3. While the oven cavity temperature is too high, you
cannot use AUTO (Reheat). The display will show “U 04” .
4
5
6
7
1
2
3
Operating Pads
CONTROL PANEL
1. POWER LEVEL pad
Press to select microwave power setting.
2. REHEAT/DEFROST pad
Press to select Reheat and Defrost menu.
3. DONABE pad
Press to select Donabe Cooking menu.
4. MORE/LESS pads
Press to alter the cooking result for automatic
operations: AUTO (Reheat) and Defrost.
5. Dial
Turn to select desired option.
Turn to select desired quantity.
Turn to enter cooking time.
6 . START pad
Press to reheat food automatically. See page E-6.
Press to start oven after setting programmes.
Press to confirm your choice.
7. STOP / CLEAR pad
Press to clear during programming.
Press once to stop operation of oven during cooking;
press twice to cancel cooking programme.
The display shows useful information including cooking time and
cooking mode.
: AUTO (Reheat) is in progress.
COOKING MODE INDICATORS:
TIME / AMOUNT INDICATORS:
: Minute
: Second
OVEN CONDTION INDICATORS:
: The steaming for Donabe RICE cooking
will begin soon.
: Donabe Cooking is complete.
: MORE( ) / STANDARD( • ) / LESS( )
indicators for automatic cooking.
: Cup
: Donabe RICE cooking is selected.
: Donabe DISH cooking is selected.
: Reheat mode is selected.
: Defrost mode is selected.
Display Information
300g ( ) / 200g ( • ) / 100g ( )
indicators for Donabe DISH menu no. 21.
Press to alter the food weight for Donabe DISH
menu no. 21.
