background image

4

To avoid the danger of fire

1. 

The microwave ovens should not be left unattended 
during operation. Power levels that are too high or 
cooking times that are too long may overheat foods 
resulting in a fire.

2.  A separate circuit serving only this appliance should be 

provided.

3.  Do not place the oven in areas where heat is generated. 

For example, close to a conventional oven.

4.  Do not install the oven in an area of high humidity or where 

moisture may collect.

5.  Do not store or use the oven outdoors.

6. 

Clean the splash cover and the oven cavity after use. 
These must be dry and free from grease. Built-up grease 
may overheat and begin to smoke or catch fire. 

7. 

Do not place flammable materials near the oven or ventilation 
openings.

8.  Do not block the ventilation openings.
9.  Remove all metallic seals, wire twists, etc., from food and 

food packages. Arcing on metallic surfaces may cause a 
fire.

10.  Do not use the microwave oven to fry with oil or heat oil for 

deep frying. The temperature can not be controlled and the 
oil catch fire.

11.  To make popcorn, use only special microwave makers.
12.  Do not store food or any other items inside the oven.
13.  Check the settings after you start the oven to ensure the 

oven is operating as desired.

14.  To avoid overheating and fire, special care must be taken 

when cooking or reheating foods with a high sugar or fat 
content, for example, Sausage rolls, Pies or Christmas 
pudding.

15.  See the corresponding hints in this operation manual.

To avoid the possibility of injury

 WARNING: 

1.

 

Do not operate the oven if it is damaged or malfunctioning. 
Check the following before use:

 

a)  The door; make sure the door closes properly and ensure 

it is not misaligned or warped.

 

b)  The hinges and safety door latches; check to make sure 

they are not broken or loose.

 

c)  The door seals and sealing surfaces; ensure that they 

have not been damaged.

 

d)  Inside the oven cavity or on the door; make sure there 

are no dents.

 

e)  The power supply cord and plug; ensure that they are 

not damaged.

2.  Do not operate the oven with the door open or alter the 

safety door latches in any way.

3.  Do not operate the oven if there is an object between the 

door seals and sealing surfaces.

4.  Do not allow grease or dirt to build up on the door seals and 

adjacent parts. Follow instructions for “Care and Cleaning”, 
Page 16.

5.  Individuals with PACEMAKERS should check with their 

doctor or the manufacturer of the pacemaker for precautions 
regarding microwave ovens.

To avoid the possibility of electric shock

1.  Under no circumstances should you remove the outer 

cabinet.

2.  Never spill or insert any objects into the door lock openings 

or ventilation openings. In the event of a spill, turn off and 
unplug the oven immediately, and call a SHARP service 
agent.

3.  Do not immerse the power supply cord or plug in water or 

any other liquid.

4.  Do not let the power supply cord hang over the edge of a 

table or work surfaces.

5.  Keep the power supply cord away from heated surfaces, 

particularly the back of the oven.

6.  Do not attempt to replace the oven lamp yourself or allow 

anyone who is not an electrician authorised by SHARP to 
do so. If the oven lamp fails, please consult your dealer or 
an authorised SHARP service agent.

R-7500M [EN].indd   Sec2:4

2019/02/01   17:23:53

Summary of Contents for R-7500M





















Reviews: