Sharp R-7500M Operation Manual Download Page 13 | Manualshive

Page: 13 / 20

Sharp R-7500M Operation Manual Download Page 13

13

OVEN LAMP SETTING

You can check 4 kinds of oven lamp setting, and customize them.

1.  ON/OFF during the Door Opening
2.   ON/OFF during Cooking
3.  ON/OFF at Cooking Completion
4.  Brightness during Cooking

*

Suppose you want to check or customize the status of all
oven lamp settings.

Procedure

1 Set the oven L (unlocked).
Close the door.

3 Press the POWER

LEVEL pad repeatedly
until the desired setting
is displayed.

Display

2 Press the SET MEMORY pad.

<< ON/OFF during the Door Opening >>

ON = Factory Setting

OFF

4 Press the SET MEMORY pad to save the setting.

5 Press the POWER LEVEL pad within 3 seconds

to proceed to the next setting.

6 Press the POWER

LEVEL pad repeatedly
until the desired setting
is displayed.

<< ON/OFF during Cooking >>

ON = Factory Setting

OFF

7 Press the SET MEMORY pad to save the setting.

9 Press the POWER LEVEL

pad repeatedly until the
desired setting is displayed.

8 Press the POWER LEVEL pad within 3 seconds to

proceed to the next setting.

<< ON/OFF at Cooking Completion >>

OFF = Factory Setting

ON (flashing)

10 Press the SET MEMORY pad to save the setting.

<< Brightness during Cooking >>

Full brightness
= Factory Setting

Half brightness

11 Press the POWER LEVEL pad within 3 seconds to

proceed to the next setting.

12 Press the POWER

LEVEL pad repeatedly
until the desired setting
is displayed.

13 Press the SET MEMORY pad to save and exit the

setting.

NOTES :

1. To change the Program Lock Setting, see page 12.
2. The setting of Brightness during Cooking is invalid while you

set the oven lamp is OFF during cooking.

R-7500M [EN].indd Sec3:13

2019/02/01 17:23:57

«
...
11
12
13
14
15
...
»

Summary of Contents for R-7500M





















Reviews:

No comments