Sharp R-7500M Operation Manual Download Page 9

Page: 9 / 20

Memory Cooking can be started in 2 operating ways.

1. Program Lock Setting: LL1 or LL2
2. Program Lock Setting: L

1. Program Lock Setting: LL1 or LL2 (without the START

pad)

Suppose you want to cook with memory 2.

COOKING DOUBLE/TRIPLE QUANTITY
WITH MEMORY

Double/Triple Quantity is a feature where the oven will automatically
calculate how to cook two or three servings of a programmed food.
It does not simply double or triple the time. Factory setting is
multiplication factor 1.8 for double quantity and 2.6 for triple quantity.

Suppose you want to cook 3 servings with memory number
2 with Program Lock Setting LL1.

Procedure

1 Place food in the oven.

Then close the door.

Enter memory number.

2. Program Lock Setting: L (with the START pad)

Suppose you want to cook with memory 12.

Procedure

2 Press the START pad.

1 Place food in the oven.

Then close the door.

Enter memory number.

x 2

NOTE :

To change the Program Lock Setting, see page 12.

Procedure

2 Enter memory number.

1 Place food in the oven.

Then close the door.

Press the TRIPLE QUANTITY pad.

x 3

SAVING MEMORIES

Saving Memories is available when the oven is set at the
Program Lock Setting L

See page 12.

* Memory 1-10 are programmed as factory settings. See the

table of Programmed Memories on page 8.

* Memories must be programmed before memory cooking

can be used.

Memory banks

: 1-30

Power levels

: 0-13 (See page 11)

Maximum Cooking Time:

Single stage cooking
Power Level 13-6: 15 minutes
Power Level 5-0: 60 minutes

Multi stage cooking
Total Cooking Time: 75 minutes
Details:
Power Level 13-6: a total of 15 minutes
Power Level 5-0: a total of 60 minutes

Maximum cooking stages

: 7 stages

Multiplication factor for double/triple quantity

: 0.01-9.99

1. Setting power level and time

Suppose you want to set 1 minute on 1500 W with memory 2.

Procedure

1 Set the oven L (unlocked).

Close the door.

3 Enter memory number.

4 Enter power level.

2 Press the SET MEMORY pad.

Display

5 Enter cooking time.

6 Press the SET MEMORY pad to

save the memory.

x 4

NOTES :

1. To set more than 2 stages, repeat steps 4 and 5 before

pressing the SET MEMORY pad in step 6. When pressing
the SET MEMORY pad in step 6, the total cooking time will
be shown in the display.

2. If the programmed cooking time is over the maximum time:

* the SET MEMORY pad will be invalid.

* the power level for the next stage will not be entered.

3. To delete the program, press the POWER LEVEL pad

once in step 4. Then press the STOP/CLEAR pad.

NOTE :

Press the START pad after step 2 when the oven is set at Program
Lock Setting L.

R-7500M [EN].indd Sec3:9

2019/02/01 17:23:54

Summary of Contents for R-7500M





















Search results

Summary of Contents for R-7500M

Reviews:

Related manuals for R-7500M

Brands by name

Popular brands

Sharp R-7500M, Operation Manual

Search results

Summary of Contents for R-7500M

Reviews:

Related manuals for R-7500M

Brands by name

Popular brands