background image

14

AUDIBLE SIGNAL SOUND SETTING

You can check 4 kinds of sound settings, and customize them.
1.  Sound Volume
2.   Sound Pattern of Cooking Completion Alarm
3.  Sound Pitch of Cooking Completion Alarm
4.  Sound Pitch of Filter Cleaning Reminder

There are several options in each 
setting, which are shown as a 
number under MEMORY indicator. 
EX: Sound Volume 
     (2: Medium) 

Suppose you want to check or customize the status of all 
audible signal sound settings.

Procedure

1  Set the oven L (unlocked).
  Close the door.

3  Press the START 

pad repeatedly until 
the desired setting is 
displayed.

Display

2  Press the SET MEMORY pad.

<< Sound Volume >>

The number 0 to 3 will 
appear under MEMORY 
indicator.
2 = Factory Setting  
0 : Mute
1 : Small
2 : Medium
3 : Large

4  Press the SET MEMORY 

pad to save the setting.

5  Press the START pad within 3 seconds to 

proceed to the next setting.

6  Press the START 

pad repeatedly until 
the desired setting is 
displayed.

<< Sound Pattern of Cooking Completion Alarm >>

7  Press the SET 

MEMORY pad to save 
the setting.

The number 1 to 5 will 
appear under MEMORY 
indicator.
5 = Factory Setting

1 : 3 short beeps
2 : Short beeps, repeating 

for 1 min. 

3 : A beep for 3 sec., then 3 

short beeps after 30 and 
60 sec. 

4 : A beep for 4 sec., then 3 

short beeps after 30 and 
60 sec. 

5 : A beep for 5 sec., then 3 

short beeps after 30 and 
60sec.

9  Press the START pad 

repeatedly until the desired 
setting is displayed.

8  Press the START pad within 3 proceed to the next 

setting.

<< Sound Pitch of Cooking Completion Alarm >>

10  Press the SET MEMORY 

pad to save the setting.

<< Sound Pitch of Filter Cleaning Reminder >>

11  Press the START pad within 3 seconds to proceed to 

the next setting.

12  Press the START 

pad repeatedly until 
the desired setting is 
displayed.

13  Press the SET MEMORY 

pad to save and exit the 
setting.

The number 1 to 3 will 
appear under MEMORY 
indicator.
3 = Factory Setting  
1 : Low
2 : Medium
3 : High

The number 1 to 3 will 
appear under MEMORY 
indicator.
3 = Factory Setting  
1 : Low
2 : Medium
3 : High

NOTE : 

To change the Program Lock Setting, see page 12.

R-7500M [EN].indd   Sec3:14

2019/02/01   17:23:59

Summary of Contents for R-7500M





















Reviews: