Sharp R-7500M Operation Manual Download Page 19 | Manualshive

Page: 19 / 20

Sharp R-7500M Operation Manual Download Page 19

19

The wires in the mains cable are colour coded as shown
opposite:

As the colours of the cores in the mains lead of your oven
may not correspond with the coloured marking identifying the
terminals in your plug, connect the wires as shown: Make sure
the terminal screws are tight and the cable is held securely by
the cable grip where it enters the plug. Like most appliances
in your home, your oven must be connected to a single phase
230-240 Volt, 50 Hz alternating current supply.
If you do not make the proper electrical connections you might
damage the oven or injure yourself. Neither SHARP nor the
supplier will be liable if this happens.

TO REPLACE THE MAINS PLUG

green and yellow stripes = EARTH
blue

= NEUTRAL

brown

= LIVE

• The green and yellow wire to the plug terminal marked E or

or coloured green or coloured green and yellow.

• The blue wire to the plug terminal marked N or coloured

black or coloured blue.

• The brown wire to the plug terminal marked L or coloured

red or coloured brown.

!

WARNING

THIS APPLIANCE MUST BE EARTHED.
IF YOU HAVE ANY DOUBTS ABOUT YOUR ELECTRICAL
SUPPLY ASK A QUALIFIED ELECTRICIAN.

• If you are unable to resolve a problem using the checks

covered on the last few pages, do not attempt to service this
microwave oven yourself.

• Contact the dealer or supplier from whom the oven was

purchased in order to obtain service.

01296 663400 (office hours)

CALLING FOR SERVICE

• For general information & assistance with oven queries,

please contact our help desk:
Telephone: 01296 663400 (office hours)
e-mail: [email protected]

R-7500M [EN].indd Sec3:19

2019/02/01 17:24:02

«
...
17
18
19
20
»

Summary of Contents for R-7500M





















Reviews:

No comments