Sharp R-7500M Operation Manual Download Page 20

Page: 20 / 20

* This Product fulfils the requirement of the European

standard EN55011. In conformity with this standard,
this product is classified as group 2 class B equipment.
Group 2 means that the equipment intentionally
generates radio-frequency energy in the form of
electromagnetic radiation for heating treatment of food.
Class B equipment means that the equipment suitable
to be used in domestic establishments.
This product is designed for commercial application
only and as such it falls outside the scope of Regulation
(EC) 1275/2008 implementing EU Directive 2005/32/EC
on eco-design requirements for standby and off mode
electric power consumption. Sharp do not recommend
the product for domestic application and will not accept
any liability for such use.

SPECIFICATIONS

AC Line Voltage ................... Single phase 230-240 V, 50 Hz
AC Power Required ............. 2.85 kW
Output Power ....................... 1800 W (IEC 60705)
Microwave Frequency .......... 2450 MHz* (Group 2 / Class B)
Sound level .......................... less than 70dB (A)
Outside Dimensions ............ 420(W) x 337(H) x 480(D) mm
(Single)

420(W) x 674(H) x 480(D) mm

(Two ovens stacked)

Cavity Dimensions ............... 332(W) x 171.5(H) x 330(D) mm
Oven Capacity ..................... 0.7 cu.ft (19 litres)
Cooking Uniformity .............. Rotary antenna system
Weight ................................. Approx. 20kg

• As part of a policy of continuous improvement, we reserve

the right to alter design and specification without notice.

NOTE: External Equipotential Earthing Terminal

Equipment has secondary earthing terminal.
Terminal provides external earthing connection
used in addition to earthing prong on plug. Located on
outside of oven back, terminal is marked with symbol
shown on the right side.

Information on the Disposal of this Equipment

IF YOU WISH TO DISPOSE OF THIS EQUIPMENT, DO NOT USE THE ORDINARY WASTE BIN, AND
DO NOT PUT THEM INTO A FIREPLACE!
Used electrical and electronic equipment should always be collected and treated SEPARATELY in
accordance with local law.
Separate collection promotes an environment-friendly treatment, recycling of materials, and minimizing
final disposal of waste. IMPROPER DISPOSAL can be harmful to human health and the environment
due to certain substances! Take USED EQUIPMENT to a local, usually municipal, collection facility,
where available.
If in doubt about disposal, contact your local authorities or dealer and ask for the correct method of
disposal.
ONLY FOR USERS IN THE EUROPEAN UNION, AND SOME OTHER COUNTRIES; FOR INSTANCE
NORWAY AND SWITZERLAND: Your participation in separate collection is requested by law.
The symbol shown above appears on electrical and electronic equipment (or the packaging) to remind
the users of this.
Users from PRIVATE HOUSEHOLDS are requested to use existing return facilities for used equipment.
Return is free of charge.
If the equipment has been used for BUSINESS PURPOSES, please contact your SHARP dealer
who will inform you about take-back. You might be charged for the costs arising from take-back. Small
equipment (and small quantities) might be taken back by your local collection facility. For Spain: Please
contact the established collection system or your local authority for take-back of your used products.