CARE AND CLEANING
CAUTION: DO NOT USE COMMERCIAL OVEN
CLEANERS, STEAM CLEANERS, ABRASIVE,
HARSH CLEANERS, OR ANY THAT CONTAIN
SODIUM HYDROXIDE OR SCOURING PADS
ON ANY PART OF YOUR MICROWAVE
OVEN.
CLEAN THE OVEN AT REGULAR INTERVALS
AND REMOVE ANY FOOD DEPOSITS - Keep
the oven clean, or the oven could lead to
a deterioration in the performance of the
microwave. This could adversely affect the
life of the appliance.
Oven exterior
The outside of your oven can be cleaned easily with mild
soap and water. Make sure the soap is wiped off with a
moist cloth, and dry the exterior with a soft towel.
Oven controls
Open the door before cleaning to de-activate the oven
controls. Care should be taken when cleaning the
oven control. Using a cloth dampened with water only,
gently wipe the panel until it becomes clean. Avoid
using excessive amounts of water. Do not use any sort
of chemical or abrasive cleaner.
Oven Interior
1. For cleaning, wipe any splatters or spills with a
soft damp cloth or sponge after each use while the
oven is still warm. For heavier spills, use a mild
soap and wipe several times with a damp cloth
until all residues are removed. Do not remove the
waveguide cover.
2. Make sure that mild soap or water does not
penetrate the small vents in the walls which may
cause damage to the oven.
3. Do not use spray type cleaners on the oven interior.
Turntable and Roller stay
Remove the turntable and roller stay from the oven.
Wash the turntable and roller stay in mild soapy water.
Dry with a soft cloth. Both the turntable and the roller
stay are dishwasher safe.
Door
To remove all traces of dirt, regularly clean both sides
of the door, the door seals and adjacent parts with a
soft, damp cloth. Do not use abrasive cleaner.
NOTE:
A steam cleaner should not be used.
Please check the following before calling for service.
1. Power Supply
Check the power plug is properly connected to a suitable wall outlet.
Check the line fuse/circuit breaker is functioning properly.
2. When the door is opened, does the oven lamp light
?
YES
__________ NO ___________
3. Place a cup of water (approx. 150 ml) in the oven and close the door securely.
Programme the oven for one minute on 800W power and start the oven.
Does the oven lamp come on
?
YES
__________ NO ___________
Does the turntable rotate
?
YES
__________ NO ___________
NOTE:
The turntable turns in either direction.
Does the ventilation work
?
(Place your hand over the ventilation openings and check for air flow.)
YES __________ NO ___________
After 1 minute does the signal sound
?
YES
__________ NO ___________
Does cooking in progress indicator go off
?
YES __________ NO ___________
Is the cup with water warm after the above operation
?
YES
__________ NO ___________
If you answer “No” to any of the above questions, call a Service Technician appointed by SHARP and report the
results of your check. See inside back cover for details of address.
IMPORTANT:
If the display shows nothing even if the power supply plug is properly connected, the energy save
mode may be in operation. Open and close the oven door to operate the oven. See GB-6.
SERVICE CALL CHECK
115/GB-13
R-291(BK)WE [05 EN].indd 13
R-291(BK)WE [05 EN].indd 13
3/26/2014 1:20:46 PM
3/26/2014 1:20:46 PM
