48
E
(4) Dual-Touch Gesture
Set whether dual touch is enabled. When enabled, the following actions are possible:
• “Zoom” can be used to change the sheet display magnification, and two-finger drag can be used to change the displ
position. (Page 37)
• Two-finger left/right drag can be used to change the sheet. (Page 20
TIPS
• Dual touch cannot be used in Windows Vista.
• When using a PN-L series (excluding the PN-L603A/PN-60TA3/PN-L703A/PN-70TA3/PN-L603B/PN-60TB3/PN-L703B/
PN-70TB3), set “Touch Mode Setting” of the touch panel driver to “Dual”, and “Input Mode Setting” to “Standard” or
“HandWrite”.
When using the PN-L603A/PN-60TA3/PN-L703A/PN-70TA3/PN-L603B/PN-60TB3/PN-L703B/PN-70TB3, set “Touch
Operation Mode” of the touch panel settings tool to “Multi-Touch Mode”, and “Input mode” of the touch pen utility* to
“Standard” or “Handwriting”.
* This is required when using 3 button pen (sold separately) with the PN-L603B/PN-60TB3/PN-L703B/PN-70TB3.
• Dual touch may not operate correctly in the following cases:
Touching is too quick.
The distance between the two points is too short.
The two points intersect.
The points are aligned horizontally or vertically.
(5) Simultaneous Drawing with Multiple Fingers
Set to “Enable” when drawing with multiple fingers
To use this function, set “Dual-Touch Gesture” to “Disable” and “Touch Pen” to “Finger or Other Pen”. (Page 47)
(6) Automatically Find Eraser
When set to “On”, the pen automatically change to the eraser when the screen is touched with the eraser in pen mode. (Page
25)
This cannot be selected if a model that can use this function is not connected when the pen software is launched.
TIPS
• To use this function with the PN-L series (excluding the PN-L603A/PN-60TA3/PN-L703A/PN-70TA3/PN-L603B/PN-60TB3/
PN-L703B/PN-70TB3), set “Input Mode Setting” to “Standard” in the touch panel driver.
When using the PN-L603A/PN-60TA3/PN-L703A/PN-70TA3/PN-L603B/PN-60TB3/PN-L703B/PN-70TB3, set “Input mode”
of the touch pen utility* to “Standard”.
If set to other than “Standard”, the eraser auto recognition function cannot be used.
* This is required when using 3 button pen (sold separately) with the PN-L603B/PN-60TB3/PN-L703B/PN-70TB3.
(7) Restore Default Settings
Reset the settings to the initial values.
