Sharp PC-AV18 Series, Operation Manual

Page: 85 / 120

6-2
6
Entering and Exiting the Setup Utility
1. Turn on your computer.
2. When the message Press <F2> to enter SETUP appears, press F2 .
3. Change to the desired settings. Refer to the next section.
4. In Exit menu select one of the exit methods, and press Enter.
5. Confirm the message and press Enter again. The system restarts.
When the Setup Utility is opened, power management does not work. Do
not close the display cover.
Changing the Setting of the Setup Utility
To change the settings:
1. Use
→
or
←
key to select the menu; then, press Enter.
2. Use
↑
or
↓
key to select the item.
On item with mark, press Enter to open its sub menu. Press Esc to close the
sub menu and return to the previous menu.
Most of the items without mark can be changed their values or status by
pressing Enter when selected.
For date and time, press Enter on the item to select the value you want to change,
then, use minus key or space bar to change the value.
3. Close the Setup Utility by following the steps above.