Sharp PC-AV18 Series Operation Manual Download

Page: 72 / 120

4-13

Insert a PC card into the slot with the label face up until it is locked into place.

If the dialog box asking you

What do you want Windows to do?

appears, select the

task you want.

Ejecting PC Card

•

Some PC cards may become hot after long use

•

Be sure to use the procedure below when ejecting a PC card.
Otherwise, the system may not work properly

1. Click

the

Safely Remove Hardware

icon (

) on the taskbar. If you cannot find

the icon, click

to show all kinds of icons.

2. Click

Safely remove xxxxx

string

(xxxx is the name of your PC card.); then,

Safe To Remove Hardware

dialog appears.

Push the PC card eject button so that it will pop out from the side of your
computer.

Label Facing Up

Summary of Contents for PC-AV18 Series

























































































































Search results

Summary of Contents for PC-AV18 Series

Reviews:

Related manuals for PC-AV18 Series

Brands by name

Popular brands

Sharp PC-AV18 Series, Operation Manual

Search results

Summary of Contents for PC-AV18 Series

Reviews:

Related manuals for PC-AV18 Series

Brands by name

Popular brands