Sharp PC-AV18 Series, Operation Manual

Page: 26 / 120

2-3
2
Resetting System
You may need to restart the system if your computer becomes inoperable or after
adding new hardware or software. When the message appears after the installation,
click
OK , Yes , etc. to restart Windows.
You can also restart Windows by clicking start – Turn Off Computer ; then, Restart.
Resetting may cause data loss. Use the resetting process only if the
normal Windows XP Shut Down does not work because of software
malfunction. Although resetting will not damage the system, you may lose
the data you are processing.
Warm Boot (Software Reset)
If the system is locked up because of a software problem, you can reset or reboot the
system by pressing the
Ctrl + Alt + Del keys simultaneously and select Applications tab
of Windows Task Manager dialog box. Click the name of the program hanging up,
then, End Task . If this does not work, select Users tab and click Disconnect or Logoff ,
then, Yes .
Power Switch
You can turn off your computer by pressing the power button if you encounter
hardware or software problems locking up the system. In this case, press the power
button for more than four seconds.
Reset Switch
If you cannot turn off your computer with the power button, you can use the reset
switch on the bottom of your computer. To reset the system, insert a narrow object
into the small hole to press the switch.
RESET
Reset Switch