7
Getting Started
1
4.
Replace the cover.
5.
Set the battery replacement switch back to NORMAL
OPERATION (the red dot disappears).
The Organizer will not function unless the battery
replacement switch is in the NORMAL OPERATION
position.
Initializing
The Organizer must be initialized when it is used for the first
time.
1.
Press and hold the
key.
2.
While holding down the
key, push the RESET button
on the bottom of the Organizer using a pen or some other
pointed object. The following message will appear.
3.
Press
to initialize the Organizer.
The message ìWorking... Please wait.î appears while the
Organizer proceeds with the initialization procedure.
The Welcome message then appears.
Setting up the Organizer after Initialization
The Organizer takes you through the various steps needed to
set up the Organizer before use. These steps are described
below. We strongly recommend that you complete the entire
set up procedure before starting to actually use your Organizer.
*
Welcome messages and instructions
*
Setting the display contrast
*
Setting the clock
Welcome messages and instructions
After pressing
to confirm initializing the unit, the Organizer
displays the following welcome message, briefly outlining its
functions.
Press
to proceed to the Basic Instruction screen. Press
again to proceed with Display Contrast setup screen.
Summary of Contents for OZ-770
Page 32: ...Time Management 30 ...
Page 52: ...Features and Utilities for Added Power 50 ...
Page 91: ......