Sharp OZ-770 Operation Manual Download Page 73

Page: 73 / 91

Troubleshooting

Troubleshooting

Refer to the list below for solutions when the unit is not functioning properly before contacting your local SHARP dealer:

Problem

The display remains blank after pressing

Poor display contrast.

The Organizer is turned on, but pressing Keys has no effect.

ìNot enough memoryî displayed.

The alarm does not sound at the set time.

The Backlight does not function.

Solution

* Adjust the LCD contrast (see p.10)
* Install new batteries (see p.6)

Adjust the LCD contrast (see p.10)

Reset the Organizer (see p.65)

The Organizerís memory is full or nearly full. Delete unnecessary
data. (You can check the amount of free memory using CHECK
MEMORY in the Second Main Menu, see p.21).

Enable alarms in the SOUND application in the Second Main Menu.
(see p.10)

During data transfer, PC-LINK mode, the Backlight does not work,
if Battery Alert appears, replace batteries. (see P.66).

Summary of Contents for OZ-770




























































































Search results

Summary of Contents for OZ-770

Reviews:

Related manuals for OZ-770

Brands by name

Popular brands

Sharp OZ-770, Operation Manual

Search results

Summary of Contents for OZ-770

Reviews:

Related manuals for OZ-770

Brands by name

Popular brands