MX-M264U SIMULATION 6 – 26
26-38
Purpose
Setting
Function (Purpose)
Used to set Continue/Stop of print when the
maintenance life is reached.
Section
Operation/Procedure
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The set value in step 1) is saved.
26-50
Purpose
Setting
Function (Purpose)
Used to set functions.
Section
Operation/Procedure
1)
Select a target item of setting with scroll key on the touch
panel.
2)
Enter the set value with 10-key.
3)
Press [OK] key. (The set value is saved.)
(*1) Default values for each destination of item A
(*2)
26-51
Purpose
Setting
Function (Purpose)
Used to set the specifications of the serial
port operation. (For PCI)
Section
Operation/Procedure
1)
Enter the set value with 10-key.
When the PCI is installed, setting is made to 1 or 2.
2)
Press [OK] key.
MODE1: Red LED is light/blink/OFF, MODE2: Red LED always
OFF
CAUTION: When "PCI SETTING" is changed from "0" to "1" or "2,"
if SIM26-03 "OUTSIDE AUDITOR" is set to
"S_VENDOR," "OUTSIDE AUDITOR" is changed to
"NONE."
26-52
Purpose
Setting
Function (Purpose)
Used to set whether non-printed paper
(insertion paper, cover paper) is counted up
or not.
Section
Operation/Procedure
1)
Enter the set value with 10-key.
Item/Display
Content
Default
value
A
MAINTENANCE
LIFE OVER
(0: CONTINUE
1: STOP)
0
Setting of Print Continue/
Stop when the maintenance
life is over (Print Continue)
0
1
Setting of Print Continue/
Stop when the maintenance
life is over (Print Stop)
Item/Display
Content
Default
value
A
BW REVERSE
0
BW reverse copy Disable
Refer
to *1
1
BW reverse copy Enable
B
FINISHER
FUNCTION
0
Finisher special paper
The number of paper exit is
limited.
0
Refer
to *2
1
Finisher special paper
The number of paper exit is
not limited.
C
FEED TRAY
COLOR
0
Paper feed tray color display
ON during paper feed
0
1
Paper feed tray color display
OFF during paper feed
D
LONG SIZE PRINT
0
Long size print disable
0
1
Long size print enable
E
WIRELESS SET
0
Wireless LAN disable
0
1
Wireless LAN enable
Destination
Item A
U S A
1
CANADA
1
INCH
1
JAPAN
1
AB_B
1
EUROPE
1
U K
0
AUS
1
AB_A
1
CHINA
1
Target
paper
Target paper setting
0
1
Inner
finisher
Postcard,
envelope
The operation is stopped when
10 sheets of a same kind are
discharged continuously. When,
however, different kinds of
sheets are mixed and
discharged and 10 or less
sheets of a kind are
continuously discharged, the
operation is stopped by the
paper exit tray full detection.
If it is set to "1,"
the operation is
stopped when
the paper exit
tray is full or
when 250
sheets
(35.5mm thick)
are discharged.
Label
sheet,
tab sheet,
OHP
The operation is stopped when
100 sheets of a same kind are
discharged continuously. When,
however, different kinds of
sheets are mixed and
discharged and 100 or less
sheets of a kind are
continuously discharged, the
operation is stopped by the
paper exit tray full detection.
Item/Display
Content
Setting
range
Default
value
A
PCI
SETTING
Serial port PCI mode OFF
(
For connecting the serial
port vendor)
0
0
(Serial
port PCI
mode
OFF)
Serial port PCI mode ON
(JOB status LED: MODE1)
Serial port PCI mode ON
(JOB status LED: MODE2)
0
Count up
1
No count up