SHARP
TEST SIMULATION
49
24
Data Counter & Clear
1
Jam/trouble counter clear
2
Paper feed counter clear
3
Document feed & output counter clear
4
Maintenance counter clear
5
Developer counter clear
6
Copy Counter clear [Hidden on MX-C301W]
9
Print & other counter clear [Hidden on
MX-C301W]
10
Fax counter clear [Hidden on MX-C301W]
12
Document filing counter clear [Hidden on
MX-C301W]
15
Network scanner counter clear [Hidden on
MX-C301W]
35
Toner cartridge use status clear
25
DV Auto Adjustment & Monitor
1
Toner sensor monitor (Process drive)
2
Auto developer adjustment setting
4
Toner supply quantity data display
5
Toner density correction data display
26
Device Configuration
2
Paper size setting
[MX-C301W]
3
Auditor setup
[MX-C301W]
6
Destination set-up
7
Machine ID setting
[MX-C301W]
10
Network scan (MXAMX1) trial mode set-up
[MX-C301W]
18
Toner save operation
30
CE mark control setup
32
Fusing cleaning operation setting
[MX-C301W]
35
Trouble memory mode setting
38
Engine life over setting (Maintenance)
[MX-C301W]
41
Pamphlet mode AMS operation
49
Copy speed mode setup (Postcard)
[MX-C301W]
50
Function setting: (B/W reverse, Colour
mode, Finisher, Wireless set etc)
[MX-C301W]
53
Enable/Disable auto colour calibration
54
Enable/Disable auto colour calibration for
Printer
69
Toner near end setting
73
Poster enlargement image loss adjustment
74
OSA trial mode setting
[MX-C301W]
78
Remote operation (VNC) password setting.
[MX-C301W]
26
Device Configuration
79
User data delete pop up display
enable/disable
[MX-C301W]
30
Sensor Operation & Test
1
Main unit sensor check
2
Paper feed sensor check
[MX-C301W]
43
Fuser Setting & Adjustment
1
Fuser temperature setup for each mode
2
Fuser temperature setting
[MX-C301W]
4
Fuser temperature 2. setup for each mode
20
Fuser temperature. correction for low
temperature & humidity (L/L)
21
Fuser temp correction for high
temperature & humidity (H/H)
22
Perform L/L correction for fuser
temperature setting
[MX-C250/300]
23
Perform H/H correction for fuser
temperature setting
[MX-C250/300]
24
Fuser temperature correction setting
44
Process Control Data
1
Process control mode setting
2
Process control sensitivity adjustment
4
Process control initial density setup
6
High density process control correction
9
Process control data display
12
DM data, patch/base data display
14
Fuser temp.& humidity output data
15
OPC drum idle rotation setting
21
Half tone process control registration
22
Half tone process control patch result
24
Half tone correction data result display
25
Initial half tone correction data display
26
Half tone process control execution
27
Half tone process control correction clear
28
Process control timing (On/Off) setting
29
Enable/disable half tone correction during
each job
31
OPC drum deflection adjustment/check
37
DV bias correction level setting for
continuous print mode.
43
DV unit installation identification check
62
Process control execution condition setting
Summary of Contents for MX-C250F
Page 65: ...SHARP NOTES 65 ...
