MX-2300/2700 N/G MX-FRX1, MX-FRX1U 11 – 2
D. Remove the rear cabinet.
•
If the fax box unit is installed, carry out steps 1) and 2) addi-
tionally.
1) Remove the screw that secures the fax box unit.
2) Remove the fax box unit.
3) Loosen the four lower screws that secure the rear cabinet.
4) Remove the seven screws indicated in the illustration.
5) Remove the rear cabinet.
E. Remove the SCN IN PWB.
1) Remove the 12-pin and 15-pin connectors of the main unit
connected to the SCN IN PWB.
2) Remove the three screws that secure the SCN IN PWB.
3) Remove the SCN IN PWB.
4) Attach one of the three screws that have been removed in step
2) to the Mother PWB.
5) Remove the two screws for securing the DOCC PWB.
F. Attach the DOCC PWB.
1)
Connect the connector of the DOCC PWB to the 30-pin con-
nector of the Mother PWB.
2)
Use the four screws that have been removed in step E-2) and
5) to secure the DOCC PWB.
3)
Connect the 12-pin and 15-pin connectors of the main unit to
the connectors on the DOCC PWB.
4)
Ensure that pins 1 and 2 of the DIP switch on the DOCC PWB
are OFF.
G. Attach the rear cabinet.
1)
Hang the four mounting portions at the lower part of the rear
cabinet on the four screws that have been loosened.
2)
Secure the rear cabinet with the seven screws that have been
removed in step D-4).
3)
Tighten the screws that have been loosened.
•
If the fax box unit is installed, carry out steps 4) and 5)
additionally.
4)
Hang the fax box unit that has been removed in step D on the
step screw.
5)
Secure the fax box unit with the screw which was removed in
step D-1).
Summary of Contents for MX-2300 G
Page 85: ...Memo ...
