MX-2300/2700 N/G MX-PBX1 10 – 1
MX2700N
5GTXKEG/CPWCN
[10] MX-PBX1
1. Unpacking
A. Parts included
2. Installation
<Note before installation>
NOTE: To enable the printer expansion function, the product key
must be acquired. (For the acquiring procedure of the prod-
uct key, contact the distributor.)
When you acquire the product key, enter it on the product
key sheet (package part No. 2) and provide the sheet to the
user.
• To use the PS printer driver and the PPD driver, the PS expan-
sion kit is required.
A. Preparations for enabling the printer
expansion kit
(1) Entering the product key
1) To enable the printer expansion function, enter the product key
by the key operations on the operation panel.
a) Touch [PRODUCT KEY INPUT].
b) Enter the product key with the 10-key and touch [OK] key.
2) After completion of entering the product key, turn OFF the
power switch of the machine and the main power switch, and
then turn ON the power switch and the main power switch.
(2) Printer driver/PC-FAX driver installation
* Use the packed CD-ROM (package part No. 1) to install the
printer driver and other drivers.
Be sure to use this CD-ROM to install the PS printer driver and
the PPD driver.
* Installation and setting of the driver software to the PC or the
server must be performed by the user himself/herself or by the
user's request.
1) The machine must be connected in a network as shown below.
* Supported OS: Windows 98/Me (No need to be Administra-
tor), Windows NT4.0/2000/XP/Server 2003 (Need to be
Administrator)
2) Insert the "Software CD-ROM" into the CD-ROM drive.
• To install the PCL printer driver, the PC printer driver, or the
PPD driver (when the expansion kit is installed), insert the
"Software CD-ROM" with "for Windows
£
Macintosh" speci-
fied on it into the CD-ROM drive.
3)
Click [START] button and [My computer], and double-click
[CD-ROM] icon.
• In the case of Windows 98/Me/Nt 4.0/2000, double-click [My
computer] and double-click [CD-ROM] icon.
4)
Double-click [SETUP] icon.
5)
Confirm the contents of "Software License Agreement" dis-
played on the screen and press [YES]. Confirm the contents of
"Read me first" and click [NEXT] button.
6)
Click [Printer Driver] button.
• To install the PC-FAX driver, click [Support Tool] button, and
click [PC-FAX driver] button.
• When [Detailed information display] button is clicked, the
detailed information of the software is displayed.
7)
Click [NEXT] button and click [Standard install] button.
The connection method is the LPR direct system. The name of
the printer driver can be fixed as the normally used printer. The
display font for the PCL printer driver is not installed.
• Click [Custom install] button, and items can be changed and
installed.
8)
The printer connected in the network is detected. Select this
machine and click [NEXT] button.
• If this machine cannot be detected by retrieval, check to
confirm that the power of this machine is turned ON and that
the machine is surely connected in the network, and click
[Retrieval again] to perform retrieval again. With [Conditions
setup] button, the model name of this machine (host name)
or the IP address can be used for retrieval.
9)
The confirmation screen is displayed. Check the contents and
click [NEXT] button.
When the printer driver selection screen is displayed, select
the printer driver to be installed, and click [NEXT] button.
10) If the selection screen of the normally used printer is dis-
played, select either item and click [NEXT] button.
11) Check the contents according to the indications on the screen,
and click [NEXT] button. Installation is started.
* In the case of Windows 2000/XP/Server 2003:
When the Windows logo test screen or the warning screen
of digital signature is displayed, be sure to click [Continue] or
[OK] button.
12) When the completion screen of installation is displayed, click
[Complete] button. Then click [CLOSE] button to terminate the
installer.
(3) Adjust the printer driver to adapt with the machine
configuration.
After installation of the printer driver, the status of the peripheral
devices installed to the machine and the size and the type of paper
set in the machine must be set to the printer driver. Refer to the fol-
lowing procedures (when installing the standard printer driver) to
set the printer driver.
1)
Click [START] button and click [Printer and FAX] button.
* In the case of Windows 98/Me/NT 4.0/2000, click [START]
button, select [Setting] and click [Printer] button.
* In the case of Windows XP, if [Printer and FAX] does not
appear on [START] menu, click [START] button and select
[Control panel]
o
[Printer and other hardware]
o
[Printer
and FAX] in this sequence.
2)
Open the printer property screen.
a) Click the printer driver icon of this machine.
b) Click the [File] menu.
c) Select [Property].
3)
Click [Option] tab.
* In the case of Windows 98/Me, click [Driver setting] tab, and
click [Option] tab on the displayed screen.
4)
Click [Option auto setting] button.
The status of this machine is detected and setting is performed
automatically.
No.
Packed part names
Quantity
1
CD-ROM
1
2
Product key sheet
1
3
BMLinkS label
1
4
On BMLinkS
1
1
2
3
4
TCP/IP network
(Local area network)
Windows computer
(Connected in the same network)
The LPR protocol is
used for print-out.
Summary of Contents for MX-2300 G
Page 85: ...Memo ...
