Sharp FO-CC500, Service Manual

Page: 136 / 162

FO-CC500A
FO-K01A
8 – 31
2-16.
1. To go on to download FLASH ROM, perform the following procedures.
1-1. Only perform procedures
1
and
2
described in Table 7.
1-2. Return to 2-1.
2. To complete downloading FLASH ROM, perform the following procedures.
2-1. Perform procedures described in Table 7.
2-2. Terminate “TeraTerm”.
Table 7. Termination procedures
Cordless Handset DSS PWB (Cordless Handset PWB)
1
Set the BAT SW of the Program loader BOX to OFF (down).
2
Remove the connector jointed to the Cordless Handset DSS PWB
(Cordless Handset PWB).
FAX machine DSS PWB (built into FAX machine)
1
Turn off the FAX machine.
(Cordless PWB)
2
Remove the connector jointed to the FAX machine DSS PWB
(Cordless PWB).
FAX machine DSS PWB (Unit) (Cordless PWB)
1
Set the (h) PARK SW of the Program loader BOX to OFF (down).
2
Remove the connector jointed to the FAX machine DSS PWB
(Cordless PWB).
3) System ID
Refer to the Operation Manual of FO-K01 as for writing the system ID on the Cordless Handset. (When you add a
Cordless Handset, the system ID is automatically written.)