Sharp DV-HR400H, Operation Manual

Page: 59 / 131

57
Timer Recording/The GUIDE Plus+
®
System
Configure the GUIDE
Plus+ System
You can configure the GUIDE Plus+ system
from the “Setup” Area.
Here, you can set/change your language,
country and postal code. Also you can add/
change your external receivers details. These
can be done in the “Setup” area.
The entry for “Postal Code” is essential in
order to receive TV listings data.
The settings for “External Receivers” must be
done if you use the GUIDE Plus+ system with
an external receiver. Select appropriate
options on the screen.
For example: Changing the Postal Code in
your Recorder:
1
Press GUIDE to display the
GUIDE Plus+ screen.
2
Press
'
/
"
/
\
/
|
to select
“Setup”, then press SET/ENTER
twice.
NOTE
• It is very important that you enter correct
settings for the post code for your current
domicile in order to receive TV listings
correctly.
• Some changes (e.g., postal code) might
require a new download of TV listings
information. This can take up to 24 hours.
• When TV listings data is being down-
loaded, the Front Panel Display appears as
follows:
Country
Language
United Kingdom
Postal Code None
External Receiver 1 None
External Receiver 2 None
External Receiver 3 None
English
BBC2 1-Sep 16:45 Home Setup
Press
'
or
"
to select. Then press ENTER to
confirm.
Settings
3
Press
'
/
"
to highlight Postal
Code, then press SET/ENTER .
4
Press the Number buttons or
'
/
"
to make your changes, then
press SET/ENTER to confirm.
HR480H-045-057 05.4.25, 5:14 PM 57