98
Enjoying High Quality Sounds
Playing 2 Channel Audio with an
Analogue Connection
NOTE
• When you connect audio equipment using an analogue
connection, we recommend that you set “DVD AUDIO
OUT LEVEL” to “NO” (see page
112
).
If you set to “YES”, audio may not work properly during
disc playback.
Playing Dolby Digital,
DTS or MPEG Audio with a
Digital Connection
• Connecting an amplifier with a Dolby Digital/DTS/MPEG
Audio digital surround processor or a Dolby Digital/DTS/
MPEG Audio digital surround amplifier to the Recorder’s
coaxial or optical DIGITAL AUDIO Output jack (terminal)*
provides richer, more powerful audio play.
• To enjoy DTS Digital Surround audio, select DTS audio at
the disc menu during DVD playback, or select DTS audio
using the AUDIO button (under the cover) of the remote
control.
■
Connection to a processor or amplifier with an optical
or coaxial digital input jack (terminal)*
(White)
(Red)
(White)
(Red)
Audio cable
(commercially available)
To AUDIO
Output jacks
To amplifier
audio input jacks
Audio equipment, etc.
Jack and Plug Colours
Audio Left: White
Audio Right: Red
The Recorder
Dolby Digital/DTS/MPEG
Audio processor or amplifier
* DV-HR480H only
Optical digital cable
(commercially available)
or
Coaxial digital cable
(commercially available)
DIGITAL AUDIO Output
COAXIAL jack
To DIGITAL
AUDIO Output
OPTICAL terminal
To optical digital
input terminal
To coaxial digital
input jack
To DIGITAL
AUDIO Output
COAXIAL jack
The Recorder
Important!
• When using this connection, set the applicable type of
signal (Dolby Digital, DTS or MPEG) in “DGTL AUDIO
OUT SET” to “BITSTREAM” (see page
112
).
NOTE
• For bilingual broadcast or playback of titles that recorded
bilingual broadcast, digital audio output cannot be
switched. (If the processor or amplifier has digital audio
output switching function, switch from the end of the
audio equipment.)
• When playing back DVD video recorded with 96 kHz
(LPCM) audio format, output audio is down-converted to
48 kHz.
• To play a disc recorded in DTS (see page
124
), you need
to use DTS processor or amplifier.
• This connection is not possible if the processor or
amplifier to which you want to connect does not have an
optical or coaxial digital input jack (terminal).
• Refer to the operation manual for the processor or
amplifier for information on the connection.
HR480H-098-103
2005.4.5, 2:36 PM
98
Summary of Contents for DV-HR400H
Page 131: ......