AR-M550/M620/M700 INSTALLATION MANUAL (AR-F15/F16) 4 - 6
1) Remove the fixing screw of base cover (2 positions) in the front and
the back of the finisher, and remove the base cover.
2) Remove the fixing screws (2 pcs.) of the rear cover on the rear of
the finisher, and remove the rear cover.
3) Only for the AR-F15, remove the front cabinet lower fixing screws
(2 pcs.).
4) Open the front cabinet lower, and loosen the fixing screws (2 pcs
for each) of four casters.
5) Remove the spanner stored inside of the front cabinet upper, and
close the front cabinet upper.
6) Turn the bolt with the removed spanner so that the guide pin is in
the specified range of the scale.
(At that time, lift the finisher a little, and the bolt can be turned man-
ually.)
7) After completion of the adjustment, tighten the caster fixing screws
(8 pcs.) and close the front cabinet lower.
8) Check to insure that the intervals at the upper and the lower sides
of the main unit and the finisher are even.
9) Attach the foot covers in front and at the back of the finisher and the
rear cover on the rear side, and tighten all the fixing screws.