: Jan. 9 2004
1
AR-M550/M620/M700 INSTALLATION MANUAL (AR-CF2) 3 - 5
3) Hold the lower section of the front cabinet and the grip of the rear
cabinet as shown in the figure, tilt the inserter a little so that the indi-
cation hole in the inserter support section is fit with the metal fixture
of the finisher connecting plate installing section, and install it.
∗
At that time, check that the finisher lock lever is engaged on the
inserter groove securely.
4) Tighten the fixing screw of the inserter lock to fix the inserter and
the finisher.
5) Check that the finisher lock lever is engaged on the inserter groove
securely.
[When the inserter cannot be installed to the finisher]
When the finisher and the inserter differ in the height, perform the fol-
lowing height adjustment, and insert the inserter.
1) Set all the finisher height adjustment screws (4 positions) to the
center positions.
2) Insert the inserter to the finisher. (Refer to the procedure (7) in this
section.)
(8) Fix the extension guide of the tray
1) Pull out the extension guide of the inserter paper feed tray until it
stops.
2) Tighten the fixing screws F (2 pcs.) on the back side of the paper
feed tray.
1
