AR-M207 M165 M162 SIMULATIONS 7-46
51
02
Resist amount adjustment
Used to adjust the contact pressure (warp amount) of paper against the resist roller of the main unit resist
roller and the SPF/RSPF.
When this simulation is executed, the selection window of the adjustment items and the current set value
are displayed.
(*1) Valid only when an option is installed. (If an option is not installed, it is not displayed on the adjustment
window.)
(*2) When heavy paper slips in manual feed copy, or when a paper jam occurs in thin paper copy, adjust this
set value to remove the problem.
• Heavy paper slips.
Increase the set value.
• Thin paper jams.
Decrease the set value.
The adjustment range is 1 - 99. The default of pre-feed time for manual paper feed tray paper feed is 32. The
default for the others 50.
Select an adjustment item (mode) with the cross key, and enter the set value with 10-key.
When [OK] key is pressed, the entered value is saved to the EEPROM and the machine shifts to the copy
execution window.
After completion of copying, the machine returns to the adjustment value input window.
When [START] key is pressed instead of [OK] key, the machine shifts to the copy execution window and
performs copying.
Main
code
Sub
code
Contents
Remark
(Adjustment item selection window)
Sim51-2 RESIST ADJ.
Sim51-2 RESIST ADJ.
Sim51-2 RESIST ADJ.
2
1:TRAY1
2:TRAY2
3:TRAY3
1/3 [ 1- 99]
50
50
50
50
4:TRAY4
5:BYPASS
6:RSPF(SIDE1)
2/3 [ 1- 99]
50
50
50
50
7:RSPF(SIDE2)
8:RSPF A5
9:DUPLEX
3/3 [ 1- 99]
50
50
50
50
Sim51-2 RESIST ADJ.
10:PRE FEED
4/4 [ 1- 99]
50
50
Display text
:Adjustment mode
1:TRAY1
:Resist amount in paper feed from TRAY1
2:TRAY2
:Resist amount in paper feed from TRAY2 (*1)
3:TRAY3
:Resist amount in paper feed from TRAY3 (*1)
4:TRAY4
:Resist amount in paper feed from TRAY4 (*1)
5:BYPASS
:Resist amount in paper feed from manual tray
6:RSPF(SIDE1)
:Resist amount on SPF/RSPF document surface (*1)
7:RSPF(SIDE2)
:resist amount on RSPF document back (*1)
8:RSPF A5
:Document resist amount in A5 document back transport (*1)
9:DUPLEX
:Resist amount in DUPLEX print (Second print surface) (*1)
10: PRE FEED
:Pre-feed time of the manual feed tray paper feed. (*2)
Ready to copy.
S
100%
8 1/2
11
(Copy start window)
Copies in progress.
S
100%
8 1/2
11
(Copy execution window)
Adjustment
item selection
window
Copy start
window
Copy execution
window
OK
BACK
START
START
End of copy execution
[07]SIMULATIONS.fm 46
ページ
２００４年１１月１７日 水曜日 午後１２時１１分
