AR-M207 M165 M162 SIMULATIONS 7-8
05
02
Fusing lamp and cooling fan operation check
Used to check the operations of the heater lamp and the cooling fan and the peripheral circuits.
When this simulation is executed, the following initial menu is displayed.
When this simulation is executed, the fusing lamp repeats ON/OFF 5 times in the cycle of 500ms.
The cooling fan motor is rotated during that period. (The cooling fan, however, is rotated for about 8sec.)
After completion of the operation, the machine returns to the sub code input window.
03
Copy lamp lighting check
Used to check the operations of the copy lamp and its peripheral circuit.
When this simulation is executed, the following initial menu is displayed.
When [OK] key or [START] key is pressed, the copy lamp is lighted for about 5sec.
After passing for 5sec, the machine returns to the sub code input window.
06
01
Paper feed/transport solenoid operation check
When this simulation is executed, the names of the solenoids which can be operated are displayed. Select a
load to be operated with the 10-key.
02
Resist roller solenoid (RRS) operation check
When this simulation is executed, the machine goes to the execution start window. When [OK] key or
[START] key is pressed, the resist roller solenoid (RRS) repeats ON of 500ms and OFF of 500ms 20 times.
When the operation is completed, the machine returns to the sub code input window.
When [Interruption] key is pressed, the machine returns to the sub code input window. When [CA] key is
pressed, the machine exits the simulation mode.
Main
code
Sub
code
Contents
Remark
Sim5-2 HT LAMP
PRESS OK KEY
EXEC
Sim5-2 HT LAMP
EXEC
OK/START Key
(Initial window)
(Execution window)
Sim5-3 COPY LAMP
PRESS OK KEY
EXEC
Sim5-3 COPY LAMP
EXEC
OK/START Key
(Initial window)
(Execution window)
Sim6-1 OUTPUT CHECK
Sim6-1 OUTPUT CHECK
Sim6-1 OUTPUT CHECK
1:CPSOL
2:PSOL1
3:PSOL2
4:PSOL3
5:HPSOL
6:FSOL2
EXEC
1/2
1
(Load selection window)
1:CPSOL
2:PSOL1
3:PSOL2
4:PSOL3
5:HPSOL
6:FSOL2
EXEC
1/2
2
1:CPSOL
2:
PSOL1
3:PSOL2
4:PSOL3
5:HPSOL
6:FSOL2
EXEC
1/2
2
(Load selection window)
(Execution window)
10Key
After completion
of execution
OK/START Key
1: CPSOL
:Cassette 1 paper feed solenoid
2: PSOL1
:Cassette 2 paper feed solenoid (*)
3: PSOL2
:Cassette 2 paper feed solenoid (*)
4: PSOL3
:Cassette 3 paper feed solenoid (*)
5: HPSOL
:Manual feed tray paper feed solenoid
6: FSOL2
:Cassette 2 transport solenoid (*)
7: FSOL3
:Cassette 3 transport solenoid (*)
(*) Supported only for the model with the option installed.
Skipped for the other models without installation.
During execution, the selected solenoid repeats
ON/OFF 20 times for every 500ms.
Sim6-2 RRS CHECK
PRESS OK KEY
EXEC
Sim6-2 RRS CHECK
EXEC
OK/START Key
(Execution start window)
(Execution window)
[07]SIMULATIONS.fm 8
ページ
２００４年１１月１７日 水曜日 午後１２時１１分
