manualshive.com logo in svg

Sharp AR-7024, Operation Manual, Page: 23 / 141

Share
Download
Sharp AR-7024 Operation Manual Download Page 23

23

1

CONFIGURING THE PRINTER DRIVER

After installing the printer driver, you must configure the printer driver settings appropriately for the number of paper 
trays on the machine and the size of paper loaded in each.

1

Click the "Start" button ( 

 ), click 

"Settings" icon (

) 

→

 "Device" 

→

 

"Devices and printers".

• In Windows Server 2012, click the "Control 

Panel" 

→

 "Hardware" 

→

 "Devices and Printers" 

→

 "Printers".

• In Windows 8.1, click the  (

) icon in the start 

screen, then click the "Control Panel" 

→

 

"Hardware and Sound" 

→

 "View devices and 

printers".

2

Right-click the "XX-xxxx" printer 
driver icon, and then click "Printer 
properties".

3

Click the "Configuration" tab and set 
the printer configuration based on the 
options that have been installed.

Set the printer configuration properly. If not, 
printing may not take place correctly.

*This screen is related to the SPLC printer driver 

with network installing.

4

Click the "Set Tray Status" button and 
select the size of paper that is loaded 
in each tray.

Select a tray in the "Paper Source" menu, and 
select the size of paper loaded in that tray from 
the "Set Paper Size" menu. Repeat for each tray.

5

Click the "OK" button in the "Set Tray 
Status" window.

6

Click the "OK" button in the printer 
properties window.

For the PCL Driver or SPLC Driver with USB 
installing, to configure the settings 
automatically based on the detected machine 
status, click the "Auto Configuration" button.

Note

Summary of Contents for AR-7024














































































































































Reviews:

No comments