Sharp AR-7024 Operation Manual Download Page 12

Page: 12 / 141

SETUP

Follow the instructions in the Plug
and Play window to install the driver.

Follow the on-screen instructions.

This completes the installation of the software.

If a warning window regarding security is
displayed, please click "Install this driver
software anyway" or "Install".

Caution

System requirements for USB 2.0 (Hi-Speed mode)

• The machine's USB 2.0 connector will transfer data at the speed specified by the USB 2.0 (Hi-Speed) only if the

Microsoft USB 2.0 driver is preinstalled in the computer, or if the USB 2.0 driver for Windows that Microsoft
provides through its "Windows Update" Web page is installed.

• Even when the Microsoft USB 2.0 driver is used, it may not be possible to obtain full USB 2.0 speed if a PC card

supporting USB 2.0 is used. To obtain the latest driver (which may enable a higher speed), contact the
manufacturer of your PC card.

• Connection is also possible using a USB 1.1 port on your computer. However, the specifications will be USB 1.1

specifications (Full-Speed).

• If your computer is not compatible with USB 2.0 (Hi-Speed), the "USB 2.0 mode switching" setting in the

machine's system setting must be set to "Full-Speed". For more information, see

"SYSTEM SETTINGS" (p.93)

Summary of Contents for AR-7024














































































































































Search results

Summary of Contents for AR-7024

Reviews:

Sharp AR-7024, Operation Manual, Page: 12 / 141

Search results

Summary of Contents for AR-7024

Reviews: