Sharp AR-6020DV Service Manual Download Page 97

Page: 97 / 151

AR-6020V DISASSEMBLY AND ASSEMBLY 10 – 14

(2) Paper feed clutch

1) Disconnect the harness of the paper feed clutch and remove

the paper feed clutch unit.

2) Remove the E-rings, the spacers and the shaft with the pin.

Then, remove the paper feed clutch.

(3) Paper feed roller

1) Rotate the pin of the paper feed shaft to fit the cut part of the

cassette tray. Then, remove the paper feed shaft unit.

2) Remove the paper feed roller.

(4) Separation roller

Remove the separation roller unit

Remove the E-ring, and remove the separation roller

(5) PIN sensor

Remove the tray

Remove the PIN sensor detection lever.

Remove the harness, then, remove the PIN sensor.

Summary of Contents for AR-6020DV
























































































































































Search results

Summary of Contents for AR-6020DV

Reviews:

Related manuals for AR-6020DV

Brands by name

Popular brands

Sharp AR-6020DV, Service Manual

Search results

Summary of Contents for AR-6020DV

Reviews:

Related manuals for AR-6020DV

Brands by name

Popular brands