AR-6020V SIMULATIONS 6-28
61
03
Laser power correction setting
When this simulation is executed, the detailed number is displayed on the ratio display and the current set value is
displayed on the number of copies display.
Switching can be made with [AUTO/TEXT/PHOTO] key.
Enter the adjustment value with the Numeric keys and press the [START] key, and the entered number is
written into the EEPROM.
When the [CA] key is pressed, the entered value is saved and the simulation is terminated..
63
01
Shading check
The detection level of the white plate for shading is displayed.
(Operating procedure)
When the [START] key is pressed in the sub code input standby mode, the mirror base unit moves to the white
plate for shading and the copy lamp is lighted.
Until the light quantity of the copy lamp is stabilized, the sub code of "01" is displayed on the number of copies
display.
When the light quantity of the copy lamp is stabilized, it is revised every second, and the level of one pixel at the
CCD center where no correction is made is detected for 10 sec, and the detected level is displayed in hexadecimal
on the number of copies display. After completion of 10 sec detection, the machine goes into the sub code input
standby mode.
64
01
Self print
The optical system status is ignored and a self print is made. Also when a print command is sent from the host,
printing is performed.
(Operating procedure)
When this simulation is executed, warm-up is performed and the START indicator is lighted.
(However, the scanner is invalid and no initial operation is made.)
Enter the code number with the Numeric keys, and select a tray with the PAPER SELECT key and press the
[START] key. The selected tray start paper feed and printing is performed in the selected pattern.
*
Only the tray lamp and the online lamp are lighted, and no other lamps are lighted.
*
When the destination is of AB series, print data are made in A3 size.
(Therefore, A3 paper is desirable.)
*
When the destination is of inch series, print data are made in WLT size.
(Therefore, WLT paper is desirable.)
Main
code
Sub
code
Contents
Details of operation
LED
Display mode
Range
Default
AUTO indicator
TEXT indicator
PHOTO indicator
AUTO indicator and PHOTO
indicator
Laser power setting COPY (Setting for each
speed)
Laser power setting PRINTER (Setting for each
speed)
Laser power setting COPY TS ON (Setting for
each speed)
Laser power setting PRINTER TS ON (Setting
for each speed)
0 - 255
0 - 255
0 - 255
0 - 255
112
112
112
112
Code
number
Print pattern
Image output
Lighted LED
0
Grid pattern
<1>1/236
<2>1/128
<3>1/255
<4>2/254
AUTO indicator
TEXT indicator
PHOTO indicator
AUTO indicator & TEXT indicator
1
Dot pattern
<1>1/1
<2>2/2
<3>1/255
AUTO indicator
TEXT indicator
PHOTO indicator
2
Regular pitch pattern
MbyN (Sub scan)
<1>1/1
<2>1/2
<3>2/2
AUTO indicator
TEXT indicator
PHOTO indicator
3
Regular pitch pattern
MbyN (Main scan)
<1>1/1
<2>1/2
<3>2/2
AUTO indicator
TEXT indicator
PHOTO indicator
4
Black background belt
(A4/A4R)(Paper F-R end)
<1>1%
<2>6%
<3>35%
AUTO indicator
TEXT indicator
PHOTO indicator
5
Black background belt (All surface)
No pattern
AUTO indicator
6
White background belt (All surface)
No pattern
AUTO indicator
7
ht(All surface)
No pattern
AUTO indicator
8
Black square
No pattern
AUTO indicator
9
Lead edge black
No pattern
AUTO indicator
10
Form of
No pattern
AUTO indicator
