Sharp AR-5127 Service Manual Download Page 76

Page: 76 / 94

AR-5127 TROUBLE CODE LIST 9 - 9

Content

The print server card (AR-NC3D) is not
installed or defective.

Detail

NC3D connection failure

Cause

NC-3D is not installed to the AR-PB2A
board.
NC-3D control PWB trouble

Check
and
remedy

1) Check that the NC-3D is installed to

the AR-PB2A board.

2) Output the NIC Config. Page to check

the NIC version.

3) Replace the NIC.

Content

The specified mail server or the FTP
server is not found.

Detail

The specified mail server or the FTP
server is not found.

Cause

Network Cable connection failure
Network setup failure
SMTP server/FTP server/NST trouble

Check
and
remedy

1) Check that the Network Cable is

inserted properly.

2) Check that the connected network

supports TCP/IP protocol.

3) Check from the Web Page that the

Primary/Secondary E-mail Server
Address or the Destination FTP server/
Desktop PC address are properly set.

4) If the above address is described with

Hostname, check that the DNS server
is properly set.

5) Check that the SMTP server/FTP

server/NST causes a trouble or not.

Content

The specified server does not correspond
during image transmission.

Detail

The specified server does not correspond
during image transmission.

Cause

Network Cable connection failure
SMTP server/FTP server/NST trouble

Check
and
remedy

1) Check that the Network Cable is

inserted properly.

2) Check that the SMTP server/FTP

server/NST causes a trouble or not.

Content

The entered account name of the FTP
server or the password is invalid.

Detail

The entered account name of the FTP
server or the password is invalid.

Cause

Network Cable connection failure
The account name of the FTP server
recorded as the destination or the
password for the account name is
erroneous.

Check
and
remedy

1) Check that the Network Cable is

inserted properly.

2) Check that the account name of the

FTP server recorded as the destination
and the password for the account
name are proper.

Trouble

code

Details of trouble

Main
code

Sub

code

Content

The entered directory of the FTP server is
invalid.

Detail

The entered directory of the FTP server is
invalid.

Cause

Network Cable connection failure
Check that the directory name exists in the
FTP server recorded as the destination.

Check
and
remedy

1) Check that the Network Cable is

inserted properly.

2) Check that the directory name exists in

the FTP server recorded as the
destination.

Content

Developer adjustment trouble (Over-toner
abnormality)

Details

An abnormality occurred in execution of
automatic developer adjustment.
Sample data over-toner was detected.

Cause

Toner concentration sensor abnormality
Toner concentration trouble
Developing unit trouble
MCU PWB failure

Check
and
remedy

Use SIM 25-2 to perform the auto
developer adjustment.

Content

Developer adjustment trouble (Under-
toner abnormality)

Details

An abnormality occurred in execution of
automatic developer adjustment.
Sample data under-toner was detected.

Cause

Toner concentration sensor abnormality
Toner concentration trouble
Developing unit trouble
MCU PWB failure

Check
and
remedy

Use SIM 25-2 to perform the auto
developer adjustment.

Content

RIC copy inhibit signal received

Details

The copy inhibit command from RIC is
received.

Cause

Judged by the host.

Check
and
remedy

Information the host.
Clear trouble with SIM 17.

Trouble

code

Details of trouble

Main
code

Sub

code

Summary of Contents for AR-5127































































































Search results

Summary of Contents for AR-5127

Reviews:

Related manuals for AR-5127

Brands by name

Popular brands

Sharp AR-5127, Service Manual

Search results

Summary of Contents for AR-5127

Reviews:

Related manuals for AR-5127

Brands by name

Popular brands