manualshive.com logo in svg

Sharp AR-317 Operation, Key Operator'S Manual

Share
Download
Sharp AR-317 Operation Key Operator'S Manual Download Page 78

52

CONVENIENT COPY FUNCTIONS

5

Place the original on the document 
glass.

Place the front side of the 
original face down and 
close the document 
cover/RSPF.

6

Select the number of copies and any 
other desired copy settings, and then 
press the [START] key (

).

The front side of the card 
is scanned.

7

Place the back side of the original 
face down on the document glass.

8

Press the [START] key (

).

The back side of the card 
is scanned and copying 
begins.

• The original must be placed on the 

document glass. The RSPF cannot be 
used.

• Even when [FIT TO PAGE] is selected, 

you can touch the [COPY RATIO] key in 
the main screen of copy mode to manually 
select the ratio.

• To cancel the card shot function, touch the 

[CANCEL] key in the card shot setting 
screen (the screen of step 4).

ACC.#-C

Note

!Andromeda_copy_sec.book  52 ページ  ２００６年１１月２３日　木曜日　午後６時１分

Summary of Contents for AR-317 Operation















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands