Sharp AR-317 Operation Key Operator'S Manual Download Page 288

Page: 288 / 302

PRINTER SHARING

C O N T E N T S

Client settings

(part 1)

Follow the procedure below to install the printer driver in the client.

Click the "start" button, and click "Control
Panel".

In Windows 98/Me/2000, click the "Start" button and
select "Settings".

Click "Printers and Other Hardware", and click
"Printers and Faxes".

In Windows 98/Me/2000, click "Printers".

Click "Add a printer" in "Printer Tasks".

In Windows 98/Me/2000, double-click the "Add Printer"
icon.
The "Add Printer Wizard" will appear.

Click the "Next" button.

Select "A network printer, or a printer attached
to another computer", and click the "Next"
button.

In Windows 98/Me/2000, select "Network printer" and
click the "Next" button.

If your operating system is Windows NT 4.0, refer to "

Settings in Windows NT 4.0

Note

Summary of Contents for AR-317 Operation















































































































































































































































































































Search results

Summary of Contents for AR-317 Operation

Reviews:

Related manuals for AR-317 Operation

Brands by name

Popular brands

Sharp AR-317 Operation, Key Operator'S Manual

Search results

Summary of Contents for AR-317 Operation

Reviews:

Related manuals for AR-317 Operation

Brands by name

Popular brands