manualshive.com logo in svg

Sharp AR-317 Operation, Key Operator'S Manual

Share
Download
Sharp AR-317 Operation Key Operator'S Manual Download Page 203

2

ADVANCED PRINTING (WINDOWS)

27

C O N T E N T S

Printing text and lines in black 

Color text and lines that are faint when printed normally can be printed in black to improve legibility.

Printing text in black

Text that is any color other than white is printed in black.
To use this function, open the printer driver setup screen and 
select the "Text To Black" checkbox in the "Advanced" tab.

Printing lines in black

Lines and solids that are any color other than white are printed 
in black.
To use this function, open the printer driver setup screen and 
select the "Vector To Black" checkbox in the "Advanced" tab.

Print data

Printing result

Text To Black

Text To Black

●

When using the PCL6 printer driver, if "Print as 
graphics" is selected in "TrueType Mode" of "Font" in 
the "Advanced" tab, this function cannot be used.

●

When using the PCL5e printer driver, if "Raster" is 
selected in "Graphics mode" in the "Advanced" tab, 
this function cannot be used.

ABCD
EFGH

ABCD
EFGH

ABCD
EFGH

Note

Print data

Printing result

Vector To Black

Vector To Black

When using the PCL6 or PCL5e printer driver, if "Raster" 
is selected in "Graphics mode" in the "Advanced" tab, 
this function cannot be used.

Note

Summary of Contents for AR-317 Operation















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands