manualshive.com logo in svg

Sharp AR-317 Operation, Key Operator'S Manual

The Sharp AR-317 Operation Key Operator's Manual is available for free download on manualshive.com. This comprehensive manual provides detailed instructions and insights to efficiently operate the AR-317, ensuring optimal performance and productivity. Access the manual today and enhance your user experience with this exceptional product.

Share
Download
background image

35

TROUBLESHOOTING

3

IMPORTANT POINTS WHEN USING SCAN TO E-MAIL

Be very careful not to send image data files that are too large.
Your mail server's system administrator may have placed a limit on the amount of data that can be sent in one e-mail 
transmission. If this limit is exceeded, the e-mail will not be delivered to the recipient. Even if there is no limit and 
your e-mail is successfully delivered, a large data file may take a long time to be received and place a heavy burden 
on the recipient's network, depending on the recipient's network (Internet) connection environment.
If large image data files are repeatedly sent, the resulting burden on the network may slow down the speed of other, 
unrelated data transmissions and in some cases, may even cause the mail server or network to go down.
The images on the following page will produce the following file sizes when scanned as 8-1/2" x 11" or A4 size 
originals:

* If multiple images are scanned, the file size will be approximately (Size of each image as indicated above) x 

(Number of images scanned).

Although the actual limitation depends on your network environment, a general guideline for the maximum file size 
for Scan to E-mail is 2000 KB. In cases where you need to send multiple documents, try such measures as lowering 
the resolution mode.

Original image samples

The original images shown below are samples to help you understand the above explanations. Note that these 
images are smaller than the actual originals (the actual originals are 8-1/2" x 11" size).

Resolution

File size of text original A when scanned 

in "TEXT" mode.

File size of photo original B when

scanned in "TEXT/PHOTO" mode.

300dpi

Approx. 50 KB

Approx. 1400 KB

600dpi

Approx. 90 KB

Approx. 5000 KB

Text original A

Photo original B

!Andromeda-NS_Sec.book  35 ページ  ２００６年１１月２７日　月曜日　午後５時１０分

Summary of Contents for AR-317 Operation















































































































































































































































































































Reviews:

No comments

Related manuals for AR-317 Operation

WaxJet 6100 Service Reference Manual preview
6100
Brand: WaxJet Pages: 131
TallyGenicom 7006 Quick Start Manual preview
7006
Brand: TallyGenicom Pages: 2
Datamax MP-Compact4 Programmer'S Reference Manual preview
MP-Compact4
Brand: Datamax Pages: 95
Datamax Mark II E-4205e Operator'S Manual preview
Mark II E-4205e
Brand: Datamax Pages: 72
Oki C7550 Reference Manual preview
C7550
Brand: Oki Pages: 45
Xerox Phaser 8400 Service Manual preview
Phaser 8400
Brand: Xerox Pages: 29
Ricoh Pro L5130e Settings Manual preview
Pro L5130e
Brand: Ricoh Pages: 44
Xerox 490ST - Document Centre B/W Laser Printer System Administration Manual preview
490ST - Document Centre B/W Laser Printer
Brand: Xerox Pages: 322
Oce LightJet 430 Site Preparation Manual preview
LightJet 430
Brand: Oce Pages: 32
Xante Accel-a-Writer 8200 Manual preview
Accel-a-Writer 8200
Brand: Xante Pages: 12
E-Pos TEP-220M User Manual preview
TEP-220M
Brand: E-Pos Pages: 21
Durst Automatic Photo Book Station Specifications preview
Automatic Photo Book Station
Brand: Durst Pages: 2
Hi-Touch Imaging Technologies 630PL User Manual preview
630PL
Brand: Hi-Touch Imaging Technologies Pages: 109
WOOSIM PORTI-AP60 Operator'S Manual preview
PORTI-AP60
Brand: WOOSIM Pages: 20
Canon imagePress C710 Customer Expectation Document preview
imagePress C710
Brand: Canon Pages: 129
Canon imagePRESS C7000VP Series Service Manual preview
imagePRESS C7000VP Series
Brand: Canon Pages: 87
Canon imagePRESS C7000VP Series Trouble Shooting Information preview
imagePRESS C7000VP Series
Brand: Canon Pages: 137
Canon imageCLASS MP700 Quick Reference Manual preview
imageCLASS MP700
Brand: Canon Pages: 96

Brands by name

Popular brands

Load more brands