Sharp AL-1043, Service Manual

Page: 79 / 126

AL-1551 SIMULATION, TROUBLE CODES 10-5
26 01 Manual feed setup
(Operation/Procedure)
1. When this simulation is executed, the currently set bypass code number is displayed.
2. Enter the code number corresponding to the bypass and press the START key, and the setting will be changed.
02 SPF setup
When this simulation is executed, the currently set SPF code number is displayed. Enter the code number of the SPF to be set and press
the PRINT switch. The setup is changed.
03 Second cassette setup
(Operation/Procedure)
1. When this simulation is executed, the currently set code number of the second cassette is displayed.
2. Enter the code number and press the start key. The setting is changed.
04 Machine duplex setup
(Operation/Procedure)
1. When this simulation is executed, the currently set duplex code number is displayed.
2. Enter the code number corresponding to the duplex and press the ENTER key, and the setup will be changed.
06 Destination setup
(Operation/Procedure)
1. When this simulation is executed, the currently set destination code number is displayed.
2. Enter the code number corresponding to the destination and press the START key, and the setting will be changed.
07 Machine conditions check
(Operation/Procedure)
When this simulation is executed, the current machine setting is displayed.
The machine type is shown with the lamp display.
AL series: None
AR-A series: AE mode lamp ON
AR-B series: TEXT mode lamp ON
DM series: Photo mode lamp ON
Main
code Sub
code
Content
Code number Bypass
0 Single bypass
1 Multi bypass
Code number SPF
0 Without SPF
1 With SPF (Setup is required when installing FAX.)
2 With RSPF
Code number Second cassette
0 Without second cassette
1 With second cassette
Code number Duplex
0 Without Duplex
1 With Duplex
Code number Destination
0 Inch series
1 EX AB series
2 Japan AB series
CPM Copy quantity display
10 cpm 10
12 cpm 12
15 cpm 15
' !"#