Sharp AL-1043, Service Manual

Page: 22 / 126

AL-1551 UNPACKING AND INSTALLATION 5-5
6) The "Install From Disk" window will appear. Insert the installation CD-
ROM into the CD-ROM drive. Type R:\ (substitute the letter of your
CD-ROM drive for "R") and click the OK button.
Follow the on-screen instructions.
B. Windows 98:
1) Load paper into the paper tray of the printer.
2) Turn on the printer.
3) Turn on your computer and start Windows.
• Before installing the printer driver, be sure to close all other applications
which may be open.
4) When using Windows 98 on a personal computer with plug & play,
the "Add New Hardware Wizard" window will appear. Click the Next
button and follow the on-screen instructions.
• If the "Add New Hardware Wizard" window does not ap-pear, proceed
to step 8.
5) Select Search for the best driver for your device and click the Next
button.
6) Insert the installation CD-ROM into the CD-ROM drive.
Select CD-ROM drive and click the Next button.
7) Windows driver file search will find the device “SHARP AL-1000
Series”. Click the Next button and follow the on-screen instructions.
8) Insert the installation CD-ROM into the CD-ROM drive. Click the
Start button and select Run. When the window shown below
appears, type R:\SETUP (substitute the letter of your CD-ROM drive
for "R") and click the OK button.
Follow the on-screen instructions.
C. Windows Me/Windows 2000:
1) Load paper in the paper tray of the printer.
2) Turn on the printer.
3) Turn on your computer and start Windows.
• If a Plug & Play dialog box appears when you start Windows, click the
Cancel button to close the dialog box.
• Before installing the printer driver, be sure to close all other applications
which may be open.
4) Insert the installation CD-ROM into the CD-ROM drive. Click the
Start button and select Run. Type R:\SETUP (substitute the letter of
your CD-ROM drive for "R") and click the OK button. Follow the on-
screen instructions.
• If the "Found New Hardware Wizard" window appears when you start
Windows after installing the printer driver, click the Finish button.
D. Windows 3.1x:
1) Load paper into the paper tray of the printer.
2) Turn on the printer and then start Windows on your computer.
• Before installing the printer driver, be sure to close all other applications
which may be open.
3) Insert the installation CD-ROM into a CD-ROM drive.
4) Choose File from the Menu bar in Program Manager, and then
choose the Run... command.
5) Type R:\SETUP (substitute the letter of your CD-ROM drive for "R")
in the command line box and then click the OK button..
6) Follow the on-screen instructions.
"# $%&'