Sharp AJ-6000 Operation Manual Download

Page: 9 / 70

PART NAMES AND FUNCTIONS

The following illustration shows the part names and function of the unit. Before operating, it
is advisable to familiarise yourself with the unit.
The illustration below shows the unit with all the parts installed.

Operation panel

Use this panel to specify
your preferences for
copying and setting up
the unit.

Output tray

The document is
deposited onto the tray
after copying. Pull out
the output tray
extension when using
copy paper longer than
the output tray.

Paper tray

Holds up to 150 paper.
Adjustable to suit a variety
of paper sizes. Load the
paper so that the side to be
copied onto is face down.

Front cover locking knob

Turn this knob to the
right to open the front
cover.

Maintenance cover

Open this cover to
change the ink tanks or
print heads.

Original cover

Open this cover to set
an original for copying.

Display panel

Displays the status of
the unit, setting options
and the number of
copies.

ERROR indicator

Lights up when an error
occurs.

Power button

Press to turn the power
on or off.

Front cover

Open this cover to
change the ink tanks or
print heads.

Scan head locking switch

Lock the scan head when
moving this unit.

Front Side

Paper knob

When copying onto thick paper,
adjust the knob to setting.
(Return the knob to its original
setting after copying.)

Handles

Released

Locked

Summary of Contents for AJ-6000







































































Search results

Summary of Contents for AJ-6000

Reviews:

Related manuals for AJ-6000

Brands by name

Popular brands

Sharp AJ-6000, Operation Manual

Search results

Summary of Contents for AJ-6000

Reviews:

Related manuals for AJ-6000

Brands by name

Popular brands