manualshive.com logo in svg

Sharp AJ-6000, Operation Manual

The Sharp AJ-6000 Operation Manual is available for free download on manualshive.com. This comprehensive manual provides detailed instructions and guidance on how to efficiently operate the AJ-6000, ensuring optimal performance. Simplify your experience with this user-friendly manual, available at your convenience.

Share
Download
background image

12

INSTALLING THE PRINT HEADS AND THE INK 
TANKS

Follow the steps below to install the print heads and the ink tanks.

1

Make sure that the scan head fixing switch is released.

Refer to step 3 of "UNPACKING". (See page 9)

2

Make sure that the power is on.

Refer to "OPERATION PANEL PART NAMES AND FUNCTIONS"  for detail on how
to turn on the power when you turn on the unit. (See page 23)

3

Load paper following the steps shown in "LOADING PAPER".
(See page 19)

4

Turn the front cover locking knob with one hand and lift the
front cover with the other hand, while keeping the knob in the
unlocked position.

This section describes how to install the print heads and ink tanks when you install
them for the first time after purchasing this unit. Refer to "THE INK TANK" (See
page 50) and "THE PRINT HEAD" (See page 52) for the information on replacing
the ink tank or print head in the unit with new ones.

Keep the front cover open securely while installing print heads and ink tanks. You may
get your hand caught between the body and the front cover of the unit if you install
them with the front cover half open as shown in the illustration marked with an "X".

Do not  move the 
carriage manually by 
force.

Summary of Contents for AJ-6000







































































Reviews:

No comments

Related manuals for AJ-6000

Xerox WorkCentre Pro 128 User Manual preview
WorkCentre Pro 128
Brand: Xerox Pages: 54

Brands by name

Popular brands

Load more brands