Sharp Actius PC-UM20 Operation Manual Download

Page: 11 / 117

•

Do not drop the computer nor hit it with other equipment.

•

Do not scratch the surface of the LCD screen.

•

Turn off the computer and disconnect the AC power cord before cleaning.

Battery Pack Precautions

CAUTION

DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.
REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE
RECOMMANDED BY THE MANUFACTURER. DISCARD USED
BATTERIES ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.

Handling

•

Never put the battery pack in a fire, as it could explode and cause injury.

•

Do not attempt to open or alter the battery pack.

•

Do not place the battery where it might get hotter than 60

C (140

F).

•

Do not allow metal objects such as jewelry to short across the battery terminals,
as it could heat up and explode.

•

Do not allow liquids to come in contact with the battery pack.

•

Avoid dropping the pack or other violent shock.

•

Do not solder anything to the battery terminals.

Charging

•

Charge the battery pack only with the AC adapter included with your computer.

Summary of Contents for Actius PC-UM20






















































































































Search results

Summary of Contents for Actius PC-UM20

Reviews:

Related manuals for Actius PC-UM20

Brands by name

Popular brands

Sharp Actius PC-UM20, Operation Manual

Search results

Summary of Contents for Actius PC-UM20

Reviews:

Related manuals for Actius PC-UM20

Brands by name

Popular brands