Sharp Actius PC-UM20 Operation Manual Download

Page: 109 / 117

T-5

rou

bleshoo

ting

Trouble with the Hard Disk

Question: Why can't I read or write data to/from the hard disk?

•

Confirm the drive and file names are correct.

•

Confirm the hard disk has sufficient free space.

Trouble with the CD

Question: If the message requiring Windows 2000 CD-ROM appears?

•

Type

C:\i386

Copy files from:

dialog box.

Question: Why can’t I read data from a compact disc or play files?

•

Confirm the optional external CD-ROM drive unit is correctly connected to the
computer.

•

Confirm the CD is inserted correctly.

•

Confirm the drive and file names are correct.

•

Confirm the CD is not stained or scratched.

•

Confirm the CD or files are supported.

Trouble with Communication

Question: Why can't I communicate through the built-in modem?

•

Confirm the telephone line is properly connected to the modem jack.

•

Confirm the dial setting (plus or tone) of Windows or communication software
is matched with the telephone line.

•

Confirm the country/region setting is appropriate.

•

Confirm the network configuration is appropriate.

•

Confirm the user name or password is correct.

•

Confirm the COM port in the communication software is set appropriately.

•

Turn off the power management in the Windows.

•

If an unusual device is attached to the line you are connecting to, the modem
may not function properly. Remove the device or contact the dealer of the
device.

Summary of Contents for Actius PC-UM20






















































































































Search results

Summary of Contents for Actius PC-UM20

Reviews:

Related manuals for Actius PC-UM20

Brands by name

Popular brands

Sharp Actius PC-UM20, Operation Manual

Search results

Summary of Contents for Actius PC-UM20

Reviews:

Related manuals for Actius PC-UM20

Brands by name

Popular brands