3
www.sharkclean.com
13.
DO NOT
pull or carry by cord, use cord as
a handle, close a door on cord, or pull cord
around sharp edges or corners. Do not run
the Steam Mop over the cord. Keep the cord
away from heated surfaces.
14.
DO NOT
unplug by pulling on power cord.
To unplug, grasp the plug not the power
cord. Do not use extension cords or outlets
with inadequate current-carrying capacity.
15.
DO NOT
put any objects into the Steam
Nozzle openings. Do not use if the steam
nozzle is blocked.
16.
DO NOT
put hands or feet under the
Steam Mop—it gets very hot.
17. When mopping, use
ONLY
on flat,
horizontal surfaces. Do not use on walls,
counters or windows.
18.
DO NOT
use on leather, wax polished
furniture or floors, synthetic fabrics, velvet
or other delicate, steam sensitive materials.
19.
DO NOT
use on electronics such as
televisions, video game consoles and cable
boxes.
20.
DO NOT
add cleaning solutions,
vinegar, scented perfumes, oils or any
other chemicals to the water used in this
appliance as this may damage the unit or
make it unsafe for use. If you live in a hard
water area, we recommend using distilled
water in your steam mop.
21.
Never leave any Pocket Pad in one
spot while using or storing for any
period of time, as this may damage
your surfaces.
22. Carefully remove the Pocket Pad after you
have unplugged and allowed the Steam
Mop to cool.
23. When cleaning the Steam Mop, unplug
the power cord from the electrical outlet
and clean with a dry or damp cloth. Do not
pour water or use alcohol, benzene or paint
thinner on the Steam Mop.
24. Extreme caution should be exercised when
using the Steam Mop to clean stairs.
25. Never use Steam Mop without the Pocket
Pad attached.
26. Keep your work area well lit.
27. Store Steam Mop indoors in a cool, dry
place.
28. To avoid circuit overload, do not operate
another appliance on the same socket
(circuit) as the steam cleaner.
29. If an extension cord is absolutely necessary,
an extension cord rated a minimum of 15
ampere, 14 gage cord should be used. Cords
rated for less amperage may overheat. Care
should be taken to arrange cord so that it
cannot be pulled or tripped over.
30. To avoid scalding injuries, always unplug
and allow the Steam Mop to cool before
removing or changing Mop Heads,
Accessories or Cleaning Pads
.
WARNING
:
Your Steam Mop
is designed to clean hard floor
surfaces that will withstand high
heat. Do not use on unsealed wood or
unglazed ceramic floors. On surfaces
that have been treated with wax or
some no wax floors, the sheen may be
removed by the heat and steam
action. It is always recommended to
test an isolated area of the surface to
be cleaned before proceeding. We
also recommend that you check the
use and care instructions from the
floor manufacturer
.
SAVE THESE
INSTRUCTIONS
