background image

17

0800 862 0453

18

www.sharkclean.eu

To purchase replacement parts, please visit our website: www.sharkclean.eu 

or contact customer service: 0800 862 0453. 

PROBLEM

POSSIBLE REASONS & SOLUTIONS

Vacuum is not 
picking up dirt.

Check filters to see if they need cleaning. Follow instructions for rinsing and 
drying the filters before re-inserting back into the vacuum. (See “Maintenance” 
sections for instructions.)
Dust cup may be full; empty dust cup.
Check hose and hose connections for blockages; clear blockages if required.
If dust cup is empty, and attachment inlets are clear, check for other blockages. 
(See “Checking for Blockages” for instructions.)

Vacuum lifts scatter rugs 
(lightweight, movable rugs).

Suction is powerful. Take care when vacuuming scatter-type rugs or rugs with 
delicately sewn edges. Open the suction release on the handle to decrease 
suction power.

Move the On/Off switch to “I - Suction Only” position to disengage the brush roll

Airflow is restricted. No 
suction or light suction.

Check filters to see if they need cleaning. Follow instructions for rinsing and 
drying the filters before re-inserting back into the vacuum. 
Dust cup may be full; empty dust cup.
Check hose, hose connections, nozzles and accessories for blockages; clear 
blockages if required.
Close the suction release on the handle to increase suction power.
If dust cup is empty, and attachment inlets are clear, check for other blockages. 

Brush roll does not spin

Immediately turn off and unplug vacuum, disconnect the nozzle and remove 
blockage before reconnecting and turning vacuum back on. 
Pull the handle toward you and release the floor nozzle to disengage the auto-
off feature.
Move the On/Off switch to the “II - Brush Roll On” position.

Vacuum turns off on its 
own.

This vacuum cleaner is equipped with a motor protective thermostat. If for 
some reason your vacuum overheats, the thermostat will automatically turn 
the unit off. Should this occur, perform the following steps to restart the motor 
thermostat:
1. Move the On/Off switch to the “O” (Off) position.
2. Unplug the vacuum.
3. Empty the dust cup and clean filters. 
4.  Check for blockages in hose, accessories and inlet openings. 
5. Allow the unit to cool for a minimum of 45 minutes. 
6. Plug in the vacuum. 
7. Turn the On/Off switch to the “I” (On) position to restart the vacuum.

Note:

 If vacuum still does not start, contact Customer Service at:  

1-800-798-7398

.

Troubleshooting Guide

  

CAUTION: 

Turn power off and unplug from outlet before servicing.

Warranty

When a consumer buys a product in the UK, they get the benefit of legal rights relating to the quality of the product (your “statutory 

rights”). You can enforce these rights against your retailer. However, at Shark we are so confident about the quality of our products 

that we give you an additional manufacturer’s warranty of up to five years. These terms and conditions relate to our manufacturer’s 

warranty only – your statutory rights are unaffected.
The conditions below describe the prerequisites and scope of our warranty. They do not affect your statutory rights or the obligations 

of your retailer and your contract with them.

Shark

®

 Guarantees

A household appliance like a vacuum cleaner constitutes a sizeable investment. Your new machine needs to work properly for as long 

as possible. The guarantee it comes with is an important consideration - and reflects how much confidence the manufacturer has in its 

product and manufacturing quality.
Every Shark

®

 machine comes with a free parts and labour guarantee. Our customer service helpline (

0800 862 0453)

 is open from 

9.00am to 6.00pm Monday - Friday. It’s free to call, and you’ll be put straight through to a Shark representative. You’ll also find online 

support at 

www.sharkclean.eu/uk

.

How do I register my extended Shark

®

 guarantee?

You can register your guarantee online within 28 days of purchase. To save time, you’ll need the following information about your machine:
•  Serial number (on the machine rating label)

•  Date you purchased the machine (receipt or delivery note)

•  To register online, please visit 

www.sharkclean.eu/uk/register-guarantee

IMPORTANT

•  Both the 12 months and the extended 4 years guarantee will only cover your product from the date of purchase.

•   Please keep your receipt at all times. Should you need to use your extended guarantee we will need your receipt to verify the 

information you have supplied to us is correct. The inability to produce a valid receipt may invalidate your guarantee.

What are the benefits of registering my free Shark

®

 guarantee?

When you register your guarantee we’ll have your details to hand if we ever need to get in touch. You can also receive tips and advice 

on how to get the best out of your Shark

®

 vacuum and hear the latest news about new Shark

®

 technology and launches.

If you register your guarantee online, you’ll get instant confirmation that we’ve received your details. 

How long are new Shark

®

 machines guaranteed for?

Our confidence in our design and quality control means that your new Shark

®

 vacuum cleaner is guaranteed for a total of five years. (12 

months plus an extended warranty of 4 years).

What is covered by the free Shark

®

 guarantee?

Repair or replacement of your Shark

®

 machine (at Shark

®

’s discretion), including all parts and labour. A Shark

®

 guarantee is in addition 

to your legal rights as a consumer.

What is not covered by the free Shark

®

 guarantee?

•  Blockages – For details of how to unblock your vacuum cleaner, please refer to the Operating Manual.

•  Normal wear and tear such as brush bar, fuse, belt, batteries etc.

•   Accidental damage, faults caused by negligent use or care, misuse, neglect, careless operation or handling of the vacuum cleaner 

which is not in accordance with the Shark

®

 Operating Manual supplied with your machine.

•  Use of the vacuum cleaner for anything other than normal domestic household purposes.

•  Use of parts not assembled or installed in accordance with the operating instructions.

•  Use of parts and accessories which are not Shark

®

 Genuine Components.

•  Faulty installation (except where installed by Shark

®

).

•  Repairs or alterations carried out by parties other than Shark or its agents.

What happens when my guarantee runs out?

Shark

®

 does not design products to last for a limited time. We do appreciate that there may be a desire for our customers to want to 

repair their vacuum cleaners after the warranty has elapsed. In this case please contact our free phone customer service help line and 

ask about our out warranty program, on 

0800 862 0453

.

Where can I buy genuine Shark

®

 spares and accessories?

Shark

®

 spares and accessories are developed by the same engineers who developed your Shark

®

 vacuum. You’ll find a full range of 

Shark

®

 spares and replacement parts for all Shark

®

 machines at  

www.sharkclean.eu/uk/parts

. Accessories are at 

www.sharkclean.eu/uk/accessories

Please remember that using non-Shark

®

 spares invalidates your guarantee.

Summary of Contents for NV350UKC












Reviews: