background image

11

0800 862 0453

12

www.sharkclean.eu

CLEAN THE FLOOR IN DETACHABLE CANISTER  
MODE

1

    Press the extension wand release button and pull 

the extension wand up.

2

   Attach floor nozzle onto the end the extension wand. 

(Fig. 17)

3

   Press the On/Off switch to the “I” position to turn 

the vacuum on for above-floor cleaning.

 

 NOTE:

 The rotating brush will not rotate in 

Detachable Canister mode.

Lift-Away

®

 with Floor Nozzle

Fig. 17

Fig. 18

Quick 

Cord Release

Lower Cord 

Storage Clip

Storage

STORE YOUR VACUUM SAFELY

1

   Convert your vacuum back to upright vac mode. 

2

   Rotate the upper quick cord release to its upright 

position and coil the power cord loosely around the two 
clips. Clip the plug onto the cord to secure. 

(Fig. 18)

3

   Store the dusting brush and the crevice tool on the 

mounts on the accessory holder.

4

   Store your vacuum cleaner safely in a cool dry area 

where it will not be a hazard, will not get damaged 
and will not cause damage to anyone or anything.

 

 NOTE: 

Empty dust cup after cleaning and prior 

to storing. (See “Maintenance” section for 
instructions.)

 

 To reduce the risk of electric shock, unplug the unit 
before performing any cleaning, maintenance, or 
troubleshooting checks.

 

 Reassemble all parts securely before operating 
vacuum.

 

 DO  NOT 

operate the vacuum without the pre-motor 

filters and dust cup in place.

 

 DO  NOT

 operate the vacuum with WET filters.

 

 IMPORTANT:

 Make sure all filters are completely 

dry before inserting back into vacuum.

 

 WARNING:

 Never insert sharp objects into any 

opening to clear an obstruction.

  

IMPORTANT:

 Damages caused while clearing or 

attempting to clear blockages are not covered under 
your product’s limited warranty.

Summary of Contents for NV350UKC












Reviews: