
Doc
#
E166703
8-14
8: Using Ethernet Communication
Electro
Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
Electro
Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
Electro
Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
8.4: Network Module Hardware Initialization
If you don't know your current Network Module settings, or if the settings are lost,
you can use the meter’s Reset button to initialize the hardware with known settings
you can then work with. The Reset button is located to the right of the RS485/Ether-
net/WiFi switch.
Figure 8.3: Location of Reset Button
Using a pointed implement such as a ballpoint pen tip, press and release the
Reset
button. The Network card settings will return to the default settings shown in 8.2.1:
Modbus/TCP to RTU Bridge Setup Default Settings, on page 8-3.
Reset Button