10
11
1-800-798-7398
sharkclean.com
E
ngl
is
h
E
ngl
is
h
AFTER USE AND STORAGE
1
Press the Steam Control Button until the
three lights below start to blink, indicating
that you are in Standby mode. Unplug the
cord from the outlet and place the Steam
Mop into the upright position. Let it cool.
2
To remove the Dirt Grip
™
pad, lift the Steam
Mop straight up by the handle until the
Genius
™
Mop Head is hanging straight down.
Press the Release button on the back of the
mop body, and both sides of the mop head
will drop open, releasing the pad. Once the
pad has been released, close the mop head.
3
If the Genius Mop Head is not attached to the
mop, the pad can still be removed. Press the
two red Secondary Release Buttons located
on the sides of the mop head post to release
the pad
(fig. 12)
.
4
Empty the water tank before storing.
To empty the tank, hold the Steam Mop
beside a sink. Open the water tank lid, then
lean the unit over the sink. Let the water
drain out, then close the lid.
5
To store the Steam Mop, wait until after
it has cooled and the steam has been
released. Then remove the Genius Mop
Head and hang the mop by its handle on a
large hook (not included)
(fig. 13)
.
Caring for Your Steam Pocket
®
Mop
DIRT GRIP PAD CARE INSTRUCTIONS
Care
Machine-wash the Dirt Grip pads separately
with warm water using liquid detergent.
NEVER USE BLEACH, POWDERED
DETERGENT, OR FABRIC SOFTENERS
as
they may damage or leave a coating on the
Dirt Grip pads that will reduce their cleaning
performance and absorbency. Dirt Grip pads
should be line-dried or tumble-dried on a
low setting, as this will extend the life of the
microfiber fabric
(fig. 14)
.
Loose fibers can indicate wearing of the
microfiber fabric.
DO NOT
pull the loose
fibers, as this can cause the weave to come
undone. Simply trim the loose fibers with
scissors
(fig. 15)
.
Replacement Dirt Grip pads
For best cleaning results, we recommend
replacing your Dirt Grip pads every 3 to 4
months following normal use. As with any
fabric, dirt particles, grease, friction, and
repeated washing can cause the fibers to
break down, and you may notice an increase in
the effort needed to push or pull the mop.
You can purchase replacement Dirt Grip pads
and other accessories by visiting sharkclean.
com or calling 1-800-798-7398.
STEAM NOZZLE CARE
If you believe the main steam nozzle or the
Steam Blaster
™
nozzle is clogged, please
contact Customer Service at 1-800-798-7398
or sharkclean.com
fig. 13
fig. 12
fig. 14
fig. 15
Ordering Additional Accessories
ACCESSORY
Genius
™
Mop Head
Great for all-purpose cleaning. Get an extra boost for tough stains
from the Steam Blaster
™
and cut your cleaning time in half with the
hands-free double-sided pad.
Dirt Grip
™
Pad
Double-sided pad. Easy, hands-free installation and removal.
Washable and reusable.
Triangle Scrubber Head
Triangle shape is perfect for cleaning corners and hard-to-
reach areas. Equipped with a Steam Blaster to help loosen
stains and a deployable scrubber to tackle stuck-on spots.
Triangle Scrubber Pad
Attach to the Triangle Scrubber Head to clean corners and
other hard-to-reach spaces. Easy to install and remove.
Filling Flask
Filling line makes it simple and convenient to fill the
water tank.
