ShareTech AP-300, User Manual

Page: 39 / 103

36
802.11g Protection Enable/disable 802.11g protection, which
increases reliability but reduces bandwidth
(clients will send Request to Send (RTS) to
AP-300, and AP-300 will broadcast Clear to
Send (CTS), before a packet is sent from client.)
802.11n Protection Enable/disable 802.11n protection, which
increases reliability but reduces bandwidth
(clients will send Request to Send (RTS) to
AP-300, and AP-300 will broadcast Clear to
Send (CTS), before a packet is sent from client.)
DTIM Period Set the DTIM (delivery traffic indication
message) period value of the wireless radio.
The default value is 1.
RTS Threshold Set the RTS threshold of the wireless radio. The
default value is 2347.
Fragment
Threshold Set the fragment threshold of the wireless
radio. The default value is 2346.
Multicast Rate Set the transfer rate for multicast packets or
use the “Auto” setting.
Tx Power Set the power output of the wireless radio. You
may not require 100% output power.
Setting a
lower power output can enhance security since
potentially malicious/unknown users in distant
areas will not be able to access your signal.
Beacon Interval Set the beacon interval of the wireless radio.
The default value is 100.
Station idle
timeout Set the interval for keepalive messages from
the AP-300 to a wireless client to verify if the
station is still alive/active.