ShareTech AP-300 User Manual Download Page 50

Page: 50 / 103

IV-3-2-2. Advanced

These settings are for experienced users only. Please
do not change any of the values on this page unless

you are already familiar with these functions.

Changing these settings can adversely affect the performance of
your AP-300.

5GHz Advanced Settings

Guard Interval

Set the guard interval. A shorter interval can
improve performance.

802.11n Protection

Enable/disable 802.11n protection, which
increases reliability but reduces bandwidth
(clients will send Request to Send (RTS) to
AP-300, and AP-300 will broadcast Clear to
Send (CTS), before a packet is sent from client.)

DTIM Period

Set the DTIM (delivery traffic indication
message) period value of the wireless radio.
The default value is 1.

RTS Threshold

Set the RTS threshold of the wireless radio. The
default value is 2347.

Fragment
Threshold

Set the fragment threshold of the wireless
radio. The default value is 2346.

Multicast Rate

Set the transfer rate for multicast packets or
use the “Auto” setting.

Summary of Contents for AP-300








































































































Search results

Summary of Contents for AP-300

Reviews:

Related manuals for AP-300

Brands by name

Popular brands

ShareTech AP-300, User Manual

Search results

Summary of Contents for AP-300

Reviews:

Related manuals for AP-300

Brands by name

Popular brands