11
6.
To change the administrator name and password for the browser based
configuration interface, go to
“Management” > “Admin”
.
7.
Complete the “Administrator Name” and “Administrator Password” fields
and click “Apply”.
8.
To set the correct time for your AP-300, go to
“Management” > “Date
and Time”
.
9.
Set the correct time and time zone for your AP-300 using the drop down
menus. The AP-300 also supports NTP (Network Time Protocol) so
alternatively you can enter the host name or IP address of a time server.
Click “Apply” when you are finished.
You can use the “Acquire Current Time from your PC” button if
you wish to set the AP-300 to the same time as your PC.
Summary of Contents for AP-300
